Valve actuation parameters like lift, opening and closing times affect performance and emissions of an engine. In this work, a new hydraulic variable valve actuation (VVA) concept is explained, simulated and analyzed using MATLAB. The system applies differential hydraulic pressure on two sides of a piston to open the inlet valve. A system of orifices, one of fixed diameter and the other of variable diameter is used to control the differential pressure. Some of the key parameters, which affect the performance of the system, are fluid supply pressure, damping, orifice diameters, displacement of the plunger controlling the orifice and the spring stiffnesses. The variation of parameters like the plunger movement, inlet and exit areas in a certain way was found to reduce the response time as well as increase the lift. It was also observed that the valve lift could be varied from 3.5 mm to 8 mm by just a 1.5 mm movement of the solenoid actuator. This makes the system extremely suitable for present day high speed engines. Also the valve seating velocities obtained were low, thus proving to be a good design.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    A New Hydraulic Servo Variable Valve Actuation Concept - Simulation Studies


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Ramesh, A. (Autor:in) / H., Raghav (Autor:in)

    Kongress:

    SAE World Congress & Exhibition ; 2007



    Erscheinungsdatum :

    16.04.2007




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    A new hydraulic servo variable valve actuation concept - simulation studies

    Raghav,H.V. / Ramesh,A. / Indian Inst.of Technology,IN | Kraftfahrwesen | 2007


    A New Hydraulic Servo Variable Valve Actuation Concept - Simulation Studies

    Raghav, H. V. / Ramesh, A. / Society of Automotive Engineers | British Library Conference Proceedings | 2007


    Variable Valve Timing By Means of a Hydraulic Actuation

    Pisano, Albert P. / Hedrick, J. Karl / da Cunha, Sérgio Barros | SAE Technical Papers | 2000


    Variable valve timing by means of a hydraulic actuation

    Barros da Cunha,S. / Hedrick,J.K. / Pisano,A.P. et al. | Kraftfahrwesen | 2000


    Variable valve actuation.

    Demmelbauer-Ebner,W. / Dachs,A. / Lenz,H.P. et al. | Kraftfahrwesen | 1991