Wind noise has become an important indicator for passenger automobile quality. Several transmission paths can be related to different parts of the vehicle exterior. While the greenhouse (side glasses, windshield, seals & others) often dominates the interior noise level above 500 Hz, the contribution coming from the underbody area usually dominates the interior noise spectrum at lower frequencies. This paper describes a framework of numerical tools which is capable of determining realistic underbody turbulent and acoustic loads being generated for typical driving conditions, as well as performing the noise transmission through underbody panels and the propagation of sound to the drivers ear location. Different numerical tests are performed to demonstrate the ability of a Statistical Energy Analysis model updated with Finite Element Method properties to predict accurately the noise transmission through the underbody of simplified car vehicle in the mid frequency range under aero acoustic excitation. Parameters of the hybrid technique and the use of finite element modeling to estimate them are discussed. Transfer function comparisons between pure FEM and the hybrid technique are performed involving various load types to demonstrate the consistency of these methods. Cabin sound pressure level comparison for a simplified vehicle with wind noise excitation shows good correlation to FEM calculations performed with adequate statistical treatment. In addition, sensitivity analysis for several underbody parameters involving stiffness, mass, damping and geometry design change is applied to show further the utility of the technique for wind noise design.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Hybrid Technique for Underbody Noise Transmission of Wind Noise


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Hazir, Andreas (Autor:in) / Neuhierl, Barbara (Autor:in) / Crouse, Bernd (Autor:in) / Wiedemann, Jochen (Autor:in) / Moron, Philippe (Autor:in) / Powell, Robert (Autor:in)

    Kongress:

    SAE 2011 Noise and Vibration Conference and Exhibition ; 2011



    Erscheinungsdatum :

    2011-05-17




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Hybrid technique for underbody noise transmission of wind noise

    Moron,P. / Hazir,A. / Crouse,B. et al. | Kraftfahrwesen | 2011


    Numerical Analysis of Wind Noise Transmission through BEV Underbody

    Taniguchi, Keiichi / Hirose, Kenichi / Oshima, Munehiko et al. | SAE Technical Papers | 2023


    Wind Noise Reduction of Vehicles Using Underbody Acoustic Holography

    Ih, Kang Duck / Nam, Kyoung-Uk / Jung, Seung Gyoon | SAE Technical Papers | 2005


    Wind noise reduction of vehicle using underbody acoustic holography

    Ih,K.D. / Nam,K.U. / Jung,S.G. et al. | Kraftfahrwesen | 2005


    Simulation of Underbody Contribution of Wind Noise in a Passenger Automobile

    Neuhierl, Barbara / Crouse, Bernd / Kain, Cornelia et al. | SAE Technical Papers | 2013