A well-established cylinder bore liner material for aluminum engine blocks is Silitec™ (Dispal S260). This spray-compacted, hypereutectic aluminum-silicon alloy is cast into aluminum cylinder blocks using the high pressure die casting (HPDC) process. Silitec™ is well suited to the HPDC process because the thermal energy of the molten aluminum is removed rapidly through the metal die.Other casting processes such as sand, semi-permanent mold and low pressure die casting have longer solidification times, resulting in additional thermal energy being transferred to the aluminum liners. This additional energy may result in localized melting and deformation of the liner. Thus, in order to use aluminum cylinder liners in casting processes other than HPDC, it becomes necessary to develop alloys that are more resistant to residual heat in the casting process.In addition to thermal improvement for manufacturability, engine manufacturers also need increased mechanical properties to withstand the increasing combustion pressures of newer engine designs. These higher engine pressures increase the stress on the liner, requiring alloys with higher strength and stiffness.This paper will describe recent work at PEAK Werkstoff GmbH in Velbert, Germany, to develop new aluminum alloys to meet the needs of different casting processes and higher engine output. Included will be properties of the newly-developed Dispal alloys and recommendations for their application.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    New Aluminum Alloys for Cylinder Liner Applications


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Foss, James (Autor:in) / Kennedy, Marcus (Autor:in) / Krug, Peter (Autor:in)

    Kongress:

    SAE 2006 World Congress & Exhibition ; 2006



    Erscheinungsdatum :

    03.04.2006




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    New aluminium alloys for cylinder liner applications

    Krug,P. / Kennedy,M. / Foss,J. et al. | Kraftfahrwesen | 2006


    Development of Hypereutectic Aluminum Cylinder Liner for HPDC Cylinder Block

    Kim, Y.-g. / Choi, S.-W. / Cho, J.-W. et al. | British Library Conference Proceedings | 2014


    Development of Hypereutectic Aluminum Cylinder Liner for HPDC Cylinder Block

    Jung, Byung-jun / Cho, Jin-Woo / Kim, Seok-jun et al. | SAE Technical Papers | 2014


    Cylinder liner inspection

    PATRICK MICHAEL ANDREW RODEY / JOHN DYHR FRIIS / RASMUS KJAER NORMANN | Europäisches Patentamt | 2019

    Freier Zugriff

    Exploring PVD coatings for cylinder liner applications

    Kodali,P. / Stahley,N. / Cummins Engine,GB | Kraftfahrwesen | 2001