Turbochargers improve performance in internal combustion engines. Due to low production costs, TC assemblies are supported on floating ring bearings. In current lubrication analysis of floating ring bearing, inner and outer oil film are usually supposed to be adiabatic. The heat generated by frictional power is carried out by the lubricant flow. In reality, under real operating conditions, there existed heat transfer between the inner and outer film. In this paper, the lubrication performance of floating ring bearing when considering heat transfer between inner film and outer film is studied. The lubrication model of the floating ring is established and the heat transferred through the ring between the inner and outer film is calculated. The calculation results show that heat flow between the inner and outer film under different outer film eccentricity ratio and rotate ratio has a large difference. The rotate speed also has an obvious effect on the lubrication of the floating ring bearing. When heat transfer of the floating ring is considered, lubrication performance is changed obviously. There is a good agreement between the results predicted by the calculation model in this paper and some of the published experimental data.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Lubrication Analysis of Floating Ring Bearings Considering Floating Ring Heat Transfer


    Weitere Titelangaben:

    Sae Int. J. Fuels Lubr
    Sae International Journal of Fuels and Lubricants


    Beteiligte:
    Li, Jiaqi (Autor:in) / Ni, Jimin (Autor:in) / Wang, Qiwei (Autor:in)

    Kongress:

    SAE 2016 World Congress and Exhibition ; 2016



    Erscheinungsdatum :

    05.04.2016


    Format / Umfang :

    9 pages




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Lubrication Analysis of Floating Ring Bearings Considering Floating Ring Heat Transfer

    Li, Jiaqi / Ni, Jimin / Wang, Qiwei | British Library Conference Proceedings | 2016


    Load carrying efficiency of floating ring journal bearings

    Wilcock,D.F. / Tribolock,Schenectady,US | Kraftfahrwesen | 1983


    Measured and predicted friction in floating-ring bearings

    Trippett,R.J. / General Motors Res.Lab.,Fluid Mech.Dep.,Warren,US | Kraftfahrwesen | 1986


    Measured and Predicted Friction In Floating-Ring Bearings

    Trippett, Richard J. | SAE Technical Papers | 1986


    Analysis of Complex Loaded Floating-ring Bearings for Automotive Applications

    Anisimov, V. N. / Anisimova, N. V. / Society of Automotive Engineers | British Library Conference Proceedings | 1999