The reduction of NOx in exhaust gas has been a major challenge in diesel engine development. For the NOx reduction issues, a new Lean NOx Catalyst (LNC) aftertreatment system has been developed by Honda. A feature of the LNC system is the method that is used to reduce NOx through an NH₃-Selective Catalytic Reduction (NH₃-SCR). In an LNC system NOx is adsorbed at lean conditions, then converted to NH₃ at rich conditions and subsequently reduced in the next lean phase.In recent years, as the efficiency of the diesel engine has improved, the exhaust gas temperatures have been reduced gradually. Therefore, the aftertreatment system needs to be able to purify NOx at lower temperatures. The development of a new LNC which has a high activity at low temperature has been carried out. For the improvement of the LNC three material improvements were developed. The first of these was the development of a NOx adsorbent which is matching the targeted exhaust gas temperatures. The second improvement was the development of a layer configuration to reduce the negative cross-effects of NOx adsorbent and zeolite at low temperature. The final improvement, the most important and challenging issue, was the improvement of catalyst durability. Furthermore, the improvement of A/F control considering NOx adsorption performance and NH₃-SCR performance was carried out.As a result, a new LNC system which has high performance even in low exhaust gas temperature was established by new technologies applied to the LNC and improved A/F control.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Development of Highly Efficient Lean NOx Catalyst System in Low Exhaust Gas Temperature


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Dan, Hiroyuki (Autor:in) / Nagata, Makoto (Autor:in) / Amano, Masato (Autor:in) / Komatsu, Nobuhiro (Autor:in) / Aoyagi, Satoshi (Autor:in) / Ishimaru, Shinya (Autor:in) / Endo, Tetsuo (Autor:in) / Ito, Tomoaki (Autor:in) / Matsuzono, Yoshiaki (Autor:in) / Matsuo, Yuichi (Autor:in)

    Kongress:

    SAE 2013 World Congress & Exhibition ; 2013



    Erscheinungsdatum :

    2013-04-08




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Development of Lean Burn Catalyst

    Takami, Akihide / Saito, Fumihiko / Iwakuni, Hideharu et al. | SAE Technical Papers | 1995


    Development of lean burn catalyst

    Taami,A. / Takemoto,T. / Iwakuni,H. et al. | Kraftfahrwesen | 1995


    Evaluation of a Cu/Zeolite Catalyst to Remove NOXfrom Lean Exhaust

    DiMaggio, Craig L. / Monroe, David R. / Beck, Donald D. et al. | SAE Technical Papers | 1993


    High-temperature lean NOx catalyst and catalyst reaction management

    Ando,H. / Mitsubishi Motor,JP | Kraftfahrwesen | 2001