Brake drums are components designed to dissipate kinetic energy of vehicles, converting it, mostly, into thermal energy. The stress state originated by thermal transients produced by braking cycles may nucleate fatigue cracks and lead the component to failure. The aim of this work is to analyze and compare thermal fatigue strength for brake drums, made in vermicular cast iron, with different design geometry. Firstly, fatigue life has been evaluated for the original geometry. The same analysis has been performed after reducing the thickness of the brake drum. From thermal and structural analisys, via finite element method, temperature evolution and loading history for the component have been obtained. The life of the component has been estimated for the region with the highest probability for crack nucleation by thermal fatigue. The rain-flow method of counting cycles has been applied and Goodman equation has been used to evaluate the fatigue life of the component. In the original drum geometry, the highest level of stress has been observed in radial direction, near the bolted flange. In the drum geometry with reduced thickness the highest level has occurred in axial direction, near the surface in contact with the shoes. The fatigue analysis has shown that the drum with reduced thickness presented higher thermal fatigue endurance than the original design.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Effect of Design Geometry on the Thermal Fatigue Strength of Brake Drum Made in Vermicular Cast Iron


    Weitere Titelangaben:

    Sae Technical Papers



    Kongress:

    2006 SAE Brasil Congress and Exhibit ; 2006



    Erscheinungsdatum :

    21.11.2006




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    THERMAL FATIGUE LIVE ANALYSIS OF BRAKE DRUMS MADE WITH GRAY CAST IRON AND VERMICULAR CASTIRON VIA FEM SIMULATION

    Tavares, Fernando Lee / Amorim, Gustavo Borges / Gouvêa, Jayme Pereira et al. | SAE Technical Papers | 2005


    Compacted graphite/vermicular cast iron - the John Deere experience

    Fosbinder, L.L. / Sauer, S.A. | Tema Archiv | 1984


    Vermicular graphite cast iron - a new material for casting thermal engine components

    Riposan, I. / Sofroni, L. / Chisamera, M. | Tema Archiv | 1984


    Chassis MMC brake drum 45% lighter than cast iron

    Cabrelli | Online Contents | 2009


    Compacted Vermicular Cast Iron ( GJV ) fuer den V6 Dieselmotor von Audi

    Martin,T. / Weber,R. / Eisenwerk,Bruehl,DE | Kraftfahrwesen | 2004