Abstract Many porting systems for internal combustion engines have been tried and tested over the years, however the basic spring actuated poppet valve system has prevailed over the last century. In the goal to lower engine output parasitic losses, a simple rotary valve porting system design is proposed and analyzed. The proposed design concept takes into consideration and combines all the prominent advantages of many ealier mutlitiple design variations over the past century. The inherent primary advantage of such a rotary porting system is the elimination of reciprocating components, thus lowering vibration, and removal of highly stiff springs which contribute to considerable system power loss. Comparable sized 3-D representations of both systems are constructed in CAD (Computer Aided Design) software in order to run mechanical and fluid simulations to validate the efficiency advantage of a rotary valve porting system. Using Pro/Engineer Mechanism Dynamics module, the minimum torque required to actuate both systems at 2000 rpm and 3000 rpm is determined. Fluid simulations are performed using a commercial software CFDesign V10. Volumetric flow rates are compared during the intake stroke as well as turbulence intensity factors which characterizes a systems ability to properly mix the Air/Fuel mixture and the combustion efficiency. Some possible improvement on the rotary geometry is suggested.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Design analysis and comparison between standard and rotary porting systems for IC engine


    Beteiligte:
    Palmisano, R. (Autor:in) / Ng, H. D. (Autor:in)


    Erscheinungsdatum :

    2012




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch


    Klassifikation :

    BKL:    55.20$jStraßenfahrzeugtechnik / 55.20 Straßenfahrzeugtechnik




    Design analysis and comparison between standard and rotary porting systems for IC engine

    Palmisano, R. / Ng, H. D. | British Library Online Contents | 2012


    Aircraft-engine inlet and exhaust porting

    Young, V.C. | Engineering Index Backfile | 1944


    Aircraft-Engine - INLET and EXHAUST PORTING

    YOUNG, VINCENT C. | SAE Technical Papers | 1944


    Underwater Vehicle Porting System

    M. DeMarco | NTIS | 1981