A centrifugally powered pneumatic de-icing system was developed and tested. Two prototype designs were fabricated and parametrically tested at representative icing conditions. The superior performing design was able to remove ice thicknesses as small as 0.078 in. at −14°C and 0.112 in. at −5°C. This configuration was reproduced and installed on the outboard 8 ft section of a full-scale 24 ft K-MAX blade. Full-scale icing tests were conducted at Kaman’s outdoor whirl tower using a custom portable icing cloud generator to produce a controlled icing cloud as well as a secondary cloud generator that produced large, uncontrolled water droplets. During full-scale icing tests, the de-icing system was able to remove ice thicknesses as small as 0.08 in. at 270 rpm. A method to calculate power drawn from the main rotor during de-icing system operation is presented. During depressurization, the system draws a peak power of 4.15 hp from the rotor and 0.02 hp during pressurization. The total weight of the de-icing system is comparable to that of existent erosion caps installed on in-service helicopters.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Full-Scale Testing of a Centrifugally Powered Pneumatic De-Icing System for Helicopter Rotor Blades



    Erschienen in:

    Erscheinungsdatum :

    2017




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch


    Schlagwörter :

    Klassifikation :

    BKL:    55.50 Luftfahrzeugtechnik / 55.50
    Lokalklassifikation TIB:    770/7040




    Full-Scale Testing of a Centrifugally Powered Pneumatic De-Icing System for Helicopter Rotor Blades

    Drury, Matthew D. / Szefi, Joseph T. / Palacios, Jose L. | AIAA | 2017



    Ice Testing of a Centrifugally Powered Pneumatic Deicing System for Helicopter Rotor Blades

    Palacios, J. / Wolfe, D. / Bailey, M. et al. | British Library Conference Proceedings | 2014


    Full-Scale Experimental Validation of Dynamic, Centrifugally Powered, Pneumatic Actuators for Active Rotor Blade Surfaces

    Szefi, J. / Cormier, B. / Ionno, L. et al. | British Library Conference Proceedings | 2014