Finite element simulations of a rollover protective structure are an important aspect in its design, as it provides a means of structural integrity qualification prior to the required destructive testing. A good understanding of the rollover protective structure behaviour under simulated loading offers engineering practitioners the opportunity to optimize the design. The testing conditions, which are outlined in the applicable standards, result in plastic deformation of the rollover protective structure, associated with material hardening of various areas of the structure. An accurate description of the material behaviour is important for finite element simulations of the structural response. This research examines some of the hardening models commonly used in simulations of rollover protective structures, which are available in most finite element commercial software, including linear and multi-linear isotropic and kinematic hardening models and non-linear kinematic hardening models. The numerical performance of the plasticity models in representing the material behaviour was compared with the experimental data for commonly used rollover protective structure material. Analysis revealed the potential benefits and drawbacks of the various models. Moreover, a damage-induced softening model was implemented at the structure joints in conjunction with the non-linear hardening models. Enhanced computational results were obtained through this modelling variation, highlighting the importance of material modelling at the primary structure and the joints of a rollover protective structure.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Enhanced non-linear material modelling for analysis and qualification of rollover protective structures




    Erscheinungsdatum :

    2016




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch



    Klassifikation :

    RVK:    ZO 4200: / ZO 4200
    BKL:    55.20 / 55.20 Straßenfahrzeugtechnik
    Lokalklassifikation TIB:    275/7025



    Enhanced non-linear material modelling for analysis and qualification of rollover protective structures

    Agius,D.J. / Kourousis,K.I. / Takla,M. et al. | Kraftfahrwesen | 2016



    Enhanced non-linear material modelling for analysis and qualification of rollover protective structures

    Agius, Dylan J / Kourousis, Kyriakos I / Takla, Monir et al. | SAGE Publications | 2016


    Rollover protective device

    SCHMITT HANS-JUERGEN / DUNST BJOERN | Europäisches Patentamt | 2018

    Freier Zugriff

    ROLLOVER PROTECTIVE DEVICE

    SCHMITT HANS-JUERGEN / DUNST BJOERN | Europäisches Patentamt | 2017

    Freier Zugriff