This paper presents a numerical study of a linear compressor cascade to investigate the effective end wall profiling rules for highly loaded axial compressors. The first step in the research applies a correlation analysis for the different flow field parameters by a data mining over 600 profiling samples to quantify how variations of loss, secondary flow and passage vortex interact with each other under the influence of a profiled end wall. The result identifies the dominant role of corner separation for control of total pressure loss, providing a principle that only in the flow field with serious corner separation does the does the profiled end wall change total pressure loss, secondary flow and passage vortex in the same direction. Then in the second step, a multiobjective optimization of a profiled end wall is performed to reduce loss at design point and near stall point. The development of effective end wall profiling rules is based on the manner of secondary flow control rather than the geometry features of the end wall. Using the optimum end wall cases from the Pareto front, a quantitative tool for analyzing secondary flow control is employed. The driving force induced by a profiled end wall on different regions of end wall flow are subjected to a detailed analysis and identified for their positive/negative influences in relieving corner separation, from which the effective profiling rules are further confirmed. It is found that the profiling rules on a cascade show distinct differences at design point and near-stall point, thus loss control of different operating points is generally independent.
Effective end wall profiling rules for a highly loaded compressor cascade
2016
Aufsatz (Zeitschrift)
Englisch
BKL: | 52.30 / 52.50 / 52.50 Energietechnik: Allgemeines / 52.30 Strömungskraftmaschinen, Turbomaschinen | |
Lokalklassifikation TIB: | 275/5345/5365/5500 |
Wall Shear Stress Measurements on a Highly Loaded Compressor Cascade
Online Contents | 2013
|Simplified compound suction schemes of an aspirated highly loaded compressor cascade
Online Contents | 2016
|Control of secondary flow structures on a highly loaded compressor cascade
Online Contents | 2013
|Simplified compound suction schemes of an aspirated highly loaded compressor cascade
SAGE Publications | 2016
|Flow separation control on a highly loaded compressor cascade using endwall synthetic jets
SAGE Publications | 2018
|