Current land-based gas turbines are growing in size producing higher approach flow Reynolds numbers at the leading edge of turbine nozzles. These vanes are subjected to high intensity large scale turbulence. This present paper reports on the research which significantly expands the parameter range for stagnation region heat transfer augmentation due to high intensity turbulence. Heat transfer measurements were acquired over two constant heat flux test surfaces with large diameter leading edges (10.16 cm and 40.64 cm). The test surfaces were placed downstream from a new high intensity (17.4%) mock combustor and tested over an eight to one range in approach flow Reynolds number for each test surface. Stagnation region heat transfer augmentation for the smaller (ReD = 15,625–125,000) and larger (ReD = 62,500–500,000) leading edge regions ranged from 45% to 81% and 80% to 136%, respectively. These data also include heat transfer distributions over the full test surface compared with the earlier data acquired at six additional inlet turbulence conditions. These surfaces exhibit continued but more moderate acceleration downstream from the stagnation regions and these data are expected to be useful in testing bypass transition predictive approaches. This database will be useful to gas turbine heat transfer design engineers.
Stagnation Region Heat Transfer Augmentation at Very High Turbulence Levels
Journal of turbomachinery ; 138 , 8
2016
Aufsatz (Zeitschrift)
Englisch
Augmentation of Stagnation Region Heat Transfer Due to Turbulence From a DLN Can Combustor
Online Contents | 2001
|Effect of turbulence on heat transfer in stagnation flow
AIAA | 1996
|