Effusion cooling represents one of the most innovative techniques to limit and control the metal temperature of combustors liner, and recently, attention has been paid by the scientific community on the characterization and the definition of design practices of such devices. Most of these studies were focused on the heat transfer on the hot side of effusion cooling plates, while just few contributions deal with the effusion plates cold side convective cooling. This paper reports a numerical survey aimed at the characterization of the convective cooling at the effusion plates cold side. Several effusion holes spacing is accounted for in conjunction with representative operating conditions. The study led to the development of an empirical correlation for the prediction of the cold side heat transfer coefficient enhancement factor, EF: it expresses the EF related to each extraction hole as a function of the pressure ratio β and the effusion plate porosity factor σ.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Heat Transfer Enhancement Due to Coolant Extraction on the Cold Side of Effusion Cooling Plates




    Erscheinungsdatum :

    2015




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch



    Klassifikation :

    BKL:    52.52 Thermische Energieerzeugung, Wärmetechnik / 52.30 Strömungskraftmaschinen, Turbomaschinen / 52.52 / 52.30