The main aim of this paper is to study the influence of upstream reflections on flutter of a fan blade. To achieve this goal, flutter analysis of a complete fan assembly with an intake duct and the downstream outlet guide vanes (OGVs) (whole low pressure (LP) domain) is undertaken using a validated computational fluid dynamics (CFD) model. The computed results show good correlation with measured data. Due to space constraints, only upstream (intake) reflections are analyzed in this paper. It will be shown that the correct prediction of flutter boundary for a fan blade requires modeling of the intake and different intakes would produce different flutter boundaries for the same fan blade. However, the “blade only” and intake damping are independent and the total damping can be obtained from the sum of the two contributions. In order to gain further insight into the physics of the problem, the pressure waves created by blade vibration are split into an upstream and a downstream traveling wave in the intake. The splitting of the pressure wave allows one to establish a relationship between the phase and amplitude of the reflected waves and flutter stability of the blade. By using this approach, a simple reflection model can be used to model the intake effects.
Influence of Intake on Fan Blade Flutter
Journal of turbomachinery ; 137 , 8
2015
Aufsatz (Zeitschrift)
Englisch
NTIS | 1973
|Influence of Shock Wave on Turbomachinery Blade Row Flutter
Online Contents | 2005
|