An Electric Sail (E-Sail) propulsion system consists of long, thin tethers - positively-charged wires extending radially and symmetrically outward from a spacecraft. Tethers must be biased using a high-voltage power supply to ensure that the solar wind produces thrust. While the E-Sail concept shows great promise for flying heliopause missions with higher characteristic acceleration than solar sails, there are significant technical challenges related to deploying and controlling multiple tethers. A typical full-scale design involves a hub and spoke arrangement of 10 to 100 tethers, each 20 km long. In the last 20 years, there have been multiple space mission failures due to tether deployment and control issues, and most configurations involved a single tether. This paper describes an effort to develop and test a simple yet robust single-tether deployment system for a two-6U CubeSat configuration. The project included the following: a) Tether dynamic modeling/simulation b) E-Sail single-tether prototype development and testing c) Space environmental effects testing to identify best materials for further development. These three areas of investigation were needed to provide technical rationale for an E-Sail flight demonstration mission that is expected to be proposed for the 2022 time frame. The project team used an “agile” engineering approach in which E-Sail single-tether prototype designs were iteratively developed and tested to solve problems and identify design improvements. The agile approach was ideal for this low Technology Readiness Level (TRL) project because tether deployer development involved many unknowns in prototype development that could only be discovered through iterative cycles of construction and testing. Extensive modeling and simulation were accomplished for three types of tether deployment: a) Stage 1: propulsive separation with one 6U fixed b) Stage 2: propulsive spin-up with one 6U fixed c) Stage 3: propulsive spin-up with both 6Us free Simulation results were valuable for understanding the propulsive and braking forces needed for controlled tether deployment. This paper describes the evolution, insights, and test/ performance data related to the resultant single-tether two-6U E-Sail test article which has been demonstrated in a test laboratory. The development effort suggests near-term work needed to achieve a useful flight demonstration, and provides ideas for how multiple-tether deployment systems might evolve going forward. A planned next-generation E-Sail prototype will include autonomous propulsive tether deployment while monitoring tether tension, location on the floor, distance between tether ends, acceleration, velocity, and propellant used.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Electric Sail Tether Deployment System for CubeSats


    Beteiligte:
    Tinker, Michael (Autor:in) / Bryan, Thomas (Autor:in) / Vaughn, Jason (Autor:in) / Canfield, Steve (Autor:in) / Hargis, Benjamin (Autor:in) / Hunter, John Davis (Autor:in) / McArthur, Jonathan (Autor:in)

    Kongress:

    IEEE Aerospace Conference ; 2019 ; Big Sky, MT, United States


    Erscheinungsdatum :

    2019-03-02


    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Keine Angabe


    Sprache :

    Englisch




    Solar Sail Propulsion for Interplanetary Cubesats

    Johnson, Les / Sobey, Alex / Sykes, Kevin | NTRS | 2015


    Solar Sail Propulsion for Interplanetary Cubesats

    Johnson, Les / Sobey, Alex R. / Sykes, Kevin | AIAA | 2015


    Solar Sail Propulsion for Interplanetary Cubesats

    Johnson L. / Sobey A. / Sykes K. | NTIS | 2015


    Solar Sail Propulsion for Interplanetary CubeSats

    Johnson, Les / Cohen, Barbara / McNutt, Leslie et al. | NTRS | 2015


    Solar Sail Propulsion for Interplanetary CubeSats

    Johnson L. / Cohen B. / McNutt L. et al. | NTIS | 2015