To achieve NASA's mission of space exploration, innovative manufacturing processes are being applied to the fabrication of complex propulsion elements.1 Use of fiber-reinforced, polymeric composite tanks are known to reduce weight while increasing performance of propulsion vehicles. Maximizing the performance of these materials is needed to reduce the hardware weight to result in increased performance in support of NASA's missions. NASA has partnered with the Mississippi State University (MSU) to utilize a unique scalable approach of locally improving the critical properties needed for composite structures. MSU is responsible for the primary development of the concept with material and engineering support provided by NASA. The all-composite tank shown in figure 1 is fabricated using a prepreg system of IM7 carbon fiber/CYCOM 5320-1 epoxy resin. This is a resin system developed for out-of-autoclave applications. This new technology is needed to support the fabrication of large, all composite structures and is currently being evaluated on a joint project with Boeing for the Space Launch System (SLS) program. In initial efforts to form an all composite pressure vessel using this prepreg system, a 60% decrease in properties was observed in scarf joint regions. Inspection of these areas identified interlaminar failure in the adjacent laminated structure as the main failure mechanism. This project seeks to improve the interlaminar shear strength (ILSS) within the prepreg layup by locally modifying the interply region shown in figure 2.2
Improving Interlaminar Shear Strength
2015-01-01
Sonstige
Keine Angabe
Englisch
Modified Short Beam Shear Test for Measurement of Interlaminar Shear Strength
British Library Conference Proceedings | 2000
|Apparent Interlaminar Shear Strength of Epoxy and Vinyl Ester Composites
Kraftfahrwesen | 1983
|Apparent Interlaminar Shear Strength of Epoxy and Vinyl Ester Composites
SAE Technical Papers | 1983
|Measurement of interlaminar strength
TIBKAT | 1954
|