A rotorcraft roof sandwich panel has been redesigned to optimize sound power transmission loss (TL) and minimize structure-borne sound for frequencies between 1 and 4 kHz where gear meshing noise from the transmission has the most impact on speech intelligibility. The roof section, framed by a grid of ribs, was originally constructed of a single honeycomb core/composite face sheet panel. The original panel has coincidence frequencies near 700 Hz, leading to poor TL across the frequency range of 1 to 4 kHz. To quiet the panel, the cross section was split into two thinner sandwich subpanels separated by an air gap. The air gap was sized to target the fundamental mass-spring-mass resonance of the double panel system to less than 500 Hz. The panels were designed to withstand structural loading from normal rotorcraft operation, as well as 'man-on-the-roof' static loads experienced during maintenance operations. Thin layers of VHB 9469 viscoelastomer from 3M were also included in the face sheet ply layups, increasing panel damping loss factors from about 0.01 to 0.05. Measurements in the NASA SALT facility show the optimized panel provides 6-11 dB of acoustic transmission loss improvement, and 6-15 dB of structure-borne sound reduction at critical rotorcraft transmission tonal frequencies. Analytic panel TL theory simulates the measured performance quite well. Detailed finite element/boundary element modeling of the baseline panel simulates TL slightly more accurately, and also simulates structure-borne sound well.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Acoustically Tailored Composite Rotorcraft Fuselage Panels


    Beteiligte:
    Hambric, Stephen (Autor:in) / Shepherd, Micah (Autor:in) / Koudela, Kevin (Autor:in) / Wess, Denis (Autor:in) / Snider, Royce (Autor:in) / May, Carl (Autor:in) / Kendrick, Phil (Autor:in) / Lee, Edward (Autor:in) / Cai, Liang-Wu (Autor:in)

    Erscheinungsdatum :

    2015-07-01


    Medientyp :

    Report


    Format :

    Keine Angabe


    Sprache :

    Englisch


    Schlagwörter :


    Acoustically Tailored Composite Rotorcraft Fuselage Panels

    Hambric S. / Shepherd M. / Koudela K. et al. | NTIS | 2015


    Twin-fuselage rotorcraft

    NICOLA JEAN | Europäisches Patentamt | 2017

    Freier Zugriff

    Design, Fabrication, and Testing of Stiffened Composite Panels with Acoustically Tailored Stiffeners

    Brown, A. / Moorhouse, A. / Bakis, C. et al. | British Library Conference Proceedings | 2023


    ACOUSTICALLY ATTENUATED FUSELAGE FOR AIRCRAFT

    VERDE PRECKLER JORGE PABLO / CABALLERO ASENSIO MARIA | Europäisches Patentamt | 2016

    Freier Zugriff

    Aerodynamic Force Computations for Rotorcraft Fuselage

    Singh, R. / Dinavahi, S. / American Institute of Aeronautics and Astronautics | British Library Conference Proceedings | 2012