Non-optimum factors are used during aerospace conceptual and preliminary design to account for the increased weights of as-built structures due to future manufacturing and design details. Use of higher-fidelity non-optimum factors in these early stages of vehicle design can result in more accurate predictions of a concept s actual weights and performance. To help achieve this objective, non-optimum factors are calculated for the aluminum-alloy gores that compose the ogive and ellipsoidal bulkheads of the Space Shuttle Super-Lightweight Tank propellant tanks. Minimum values for actual gore skin thicknesses and weld land dimensions are extracted from selected production drawings, and are used to predict reference gore weights. These actual skin thicknesses are also compared to skin thicknesses predicted using classical structural mechanics and tank proof-test pressures. Both coarse and refined weights models are developed for the gores. The coarse model is based on the proof pressure-sized skin thicknesses, and the refined model uses the actual gore skin thicknesses and design detail dimensions. To determine the gore non-optimum factors, these reference weights are then compared to flight hardware weights reported in a mass properties database. When manufacturing tolerance weight estimates are taken into account, the gore non-optimum factors computed using the coarse weights model range from 1.28 to 2.76, with an average non-optimum factor of 1.90. Application of the refined weights model yields non-optimum factors between 1.00 and 1.50, with an average non-optimum factor of 1.14. To demonstrate their use, these calculated non-optimum factors are used to predict heavier, more realistic gore weights for a proposed heavy-lift launch vehicle s propellant tank bulkheads. These results indicate that relatively simple models can be developed to better estimate the actual weights of large structures for future launch vehicles.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Development of Non-Optimum Factors for Launch Vehicle Propellant Tank Bulkhead Weight Estimation


    Beteiligte:

    Kongress:

    51st AIAA Aerospace Sciences Meeting ; 2013 ; Grapevine, TX, United States


    Erscheinungsdatum :

    2012-09-28


    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Keine Angabe


    Sprache :

    Englisch




    Development Of Non-Optimum Factors For Launch Vehicle Tank Bulkhead Weight Estimation

    Wu, K.C. / Wallace, M. / Cerro, J. et al. | British Library Conference Proceedings | 2013


    Development Of Non-Optimum Factors For Launch Vehicle Tank Bulkhead Weight Estimation

    Wu, K. Chauncey / Wallace, Matthew / Cerro, Jeffrey | AIAA | 2013




    Experimental Study of Launch Vehicle Propellant Tank Fragmentation

    A. Jackson / E. H. Richardson / M. Hays et al. | NTIS | 2014