The development of rocket based combined cycle (RBCC) engines is highly dependent upon integrating several different modes of operation into a single system. One of the key components to develop acceptable performance levels through each mode of operation is the nozzle. It must be highly integrated to serve the expansion processes of both rocket and air-breathing modes without undue weight, drag, or complexity. The NASA GTX configuration requires a fixed geometry, altitude-compensating nozzle configuration. The initial configuration, used mainly to estimate weight and cooling requirements was a 1 So half-angle cone, which cuts a concave surface from a point within the flowpath to the vehicle trailing edge. Results of 3-D CFD calculations on this geometry are presented. To address the critical issues associated with integrated, fixed geometry, multimode nozzle development, the GTX team has initiated a series of tasks to evolve the nozzle design, and validate performance levels. An overview of these tasks is given. The first element is a design activity to develop tools for integration of efficient expansion surfaces With the existing flowpath and vehicle aft-body, and to develop a second-generation nozzle design. A preliminary result using a "streamline-tracing" technique is presented. As the nozzle design evolves, a combination of 3-D CFD analysis and experimental evaluation will be used to validate the design procedure and determine the installed performance for propulsion cycle modeling. The initial experimental effort will consist of cold-flow experiments designed to validate the general trends of the streamline-tracing methodology and anchor the CFD analysis. Experiments will also be conducted to simulate nozzle performance during each mode of operation. As the design matures, hot-fire tests will be conducted to refine performance estimates and anchor more sophisticated reacting-flow analysis.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Development of an Integrated Nozzle for a Symmetric, RBCC Launch Vehicle Configuration


    Beteiligte:


    Erscheinungsdatum :

    01.11.2000


    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Keine Angabe


    Sprache :

    Englisch




    The Airframe/Propulsion Integrated Design, Analysis and Ground Test for RBCC Launch Vehicle

    Gong, Chunlin / Bing, Chen / Gu, Liangxian et al. | AIAA | 2017


    Design and Optimization of RBCC Powered Suborbital Reusable Launch Vehicle

    Gong, Chunlin / Chen, Bin / Gu, Liangxian | AIAA | 2014


    Comparison Study of RBCC Powered Suborbital Reusable Launch Vehicle Concepts

    Gong, Chunlin / Bing, Chen / Gu, Liangxian | AIAA | 2015


    Trajectory Development and Optimization of an RBCC-Based Launch Vehicle (AAS 99-347)

    Hack, K. J. / Riehl, J. P. / American Astronautical Society et al. | British Library Conference Proceedings | 2000