A three-component stress-wave force-balance for a large scramjet has been designed, calibrated and tested in the HYPULSE reflected shock tunnel at GASL Inc., New York. The scramjet model is over 3-foot long and weighs in excess of 90 Ibm. The stress-wave force-balance is comprised of three stress bars which are attached to the model. Calibration results indicate that the force balance responds well within about 1 ms and that the sensitivity of the balance to the distribution of load is not large. Results with and without fuel injection were obtained in the tunnel operated for Mach 7 and Mach 10 flight simulation. These tests showed the force-balance can resolve axial force increments due to combustion of about 40 lb in the presence of model lift forces of 500-700 lb.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Three-Component Force Measurements on a Scramjet in a Reflected-Shock Tunnel


    Beteiligte:
    Tsai, C.-Y. (Autor:in) / Bakos, R. J. (Autor:in) / Mee, D. J. (Autor:in)


    Erscheinungsdatum :

    01.12.1998


    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Keine Angabe


    Sprache :

    Englisch





    Three-Component Force Measurements on a Large Scramjet in a Shock Tunnel

    M. J. Robinson / D. J. Mee / C. Y. Tsai et al. | AIAA | 2005



    Hypersonic Scramjet Testing via Diode Laser Absorption in a Reflected Shock Tunnel

    Schultz, Ian A. / Goldenstein, Christopher S. / Strand, Christopher L. et al. | AIAA | 2014


    Scramjet Combustion and Thrust Measurements in a Reflected Shock Tunnel With Varied Test Gas Atomic Oxygen Contamination

    Bakos, R. J. / Morgan, R. G. / AIAA | British Library Conference Proceedings | 1994