Design requirements for the cabin, cabin system, flight controls, engine installation, and wing-fuselage interface that provide adequate interior volume for occupant seating, cabin ingress and egress, and safety are presented. The fuselage structure must be sufficient to meet the loadings specified in the appropriate sections of Federal Aviation Regulation Part 23. The critical structure must provide a safe life of 10(exp 6) load cycles and 10,000 operational mission cycles. The cabin seating and controls must provide adjustment to account for various pilot physiques and to aid in maintenance and operation of the aircraft. Seats and doors shall not bind or lockup under normal operation. Cabin systems such as heating and ventilation, electrical, lighting, intercom, and avionics must be included in the design. The control system will consist of ailerons, elevator, and rudders. The system must provide required deflections with a combination of push rods, bell cranks, pulleys, and linkages. The system will be free from slack and provide smooth operation without binding. Environmental considerations include variations in temperature and atmospheric pressure, protection against sand, dust, rain, humidity, ice, snow, salt/fog atmosphere, wind and gusts, and shock and vibration. The following design goals were set to meet the requirements of the statement of work: safety, performance, manufacturing and cost. To prevent the engine from penetrating the passenger area in the event of a crash was the primary safety concern. Weight and the fuselage aerodynamics were the primary performance concerns. Commonality and ease of manufacturing were major considerations to reduce cost.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Cabin fuselage structural design with engine installation and control system


    Beteiligte:
    Balakrishnan, Tanapaal (Autor:in) / Bishop, Mike (Autor:in) / Gumus, Ilker (Autor:in) / Gussy, Joel (Autor:in) / Triggs, Mike (Autor:in)

    Erscheinungsdatum :

    1994-05-03


    Medientyp :

    Report


    Format :

    Keine Angabe


    Sprache :

    Englisch




    Cabin Fuselage Structural Design with Engine Installation and Control System

    T. Balakrishnan / M. Bishop / I. Gumus et al. | NTIS | 1994


    Cabin-fuselage-wing structural design concept with engine installation

    Ariotti, Scott / Garner, M. / Cepeda, A. et al. | NTRS | 1993


    Cabin-Fuselage-Wing Structural Design Concept with Engine Installation

    S. Ariotti / M. Garner / A. Cepeda et al. | NTIS | 1993


    CHASSIS WITH FUSELAGE INSTALLATION

    SALMON DZHEJMS DZHEJSON / BARMICHEV SERGEJ D / LONG MAJKL ALLAN | Europäisches Patentamt | 2017

    Freier Zugriff

    Burnthrough Resistance of Fuselage and Cabin Structures

    Povey, N. J. / Dodd, D. C. / Marker, T. R. et al. | British Library Conference Proceedings | 1997