Engine performance was investigated using a rectangular displacer on the piston crown to cause a forced air flow in a vertical-disk combustion chamber of a single-cylinder, 4-stroke-cycle compression-ignition engine. The optimum air-flow area was determined first with the area concentrated at one end of the displacer and then with the area equally divided between two passages, one at each end of the displacer. Best performance was obtained with the two-passage air flow arranged to give a calculated maximum air-flow speed of 8 times the linear crank-pin speed. With the same fuel-spray formation as used without the air flow, the maximum clear exhaust brake mean effective pressure at 1,500 r.p.m. was increased from 90 to 115 pounds per square inch and the corresponding fuel consumption reduced from 0.46 to 0.43 pound per brake horsepower-hour. At 1,200 r.p.m., a maximum clear exhaust brake mean effective pressure of 120 pounds per square inch was obtained at a fuel consumption of 0.42 pound per brake horsepower-hour. At higher specific fuel consumption the brake mean effective pressure was still increasing rapidly.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Performance tests of a single-cylinder compression-ignition engine with a displacer piston


    Beteiligte:
    Moore, C S (Autor:in) / Foster, H H (Autor:in)

    Erscheinungsdatum :

    01.02.1935


    Medientyp :

    Sonstige


    Format :

    Keine Angabe


    Sprache :

    Englisch




    Boosted performance of compression-ignition engine with displacer piston

    Moore, C.S. / Foster, H.H. | Engineering Index Backfile | 1936


    Boosted performance of a compression-ignition engine with a displacer piston

    Moore, Charles S. / Foster, Hampton H. | TIBKAT | 1936


    A Visual Study in a Displacer-Piston Compression-Ignition Engine

    Rothrock, A. M. | SAE Technical Papers | 1937


    The free- displacer, free- piston stirling engine- potential ernergy conserver.

    Martini,W.R. / Univ. Washington | Kraftfahrwesen | 1975