The Cargo Transfer Vehicle (CTV) will be required to perform six degree of freedom (6 DOF) maneuvers while carrying a wide range of payloads varying from 100,000 lbm to no payload. The current baseline design configuration for the CTV uses a forward propulsion module (FPM) mounted in front of the payload with the CTV behind the payload so that the center of gravity (CG) of the combined stack is centered between the thruster sets. This allows for efficient rotations and translations of heavy payloads in all directions; however, the FPM is a costly item, so it is desirable to find design solutions that do not require the FPM. This presentation provides an overview of the analysis of the FPM requirements for the CTV. In this study, only the reaction control system (RCS) thruster configurations are considered for 6 DOF maneuvers of various CTV cargo configurations. An important output of this study are the viable alternative thruster configurations that eliminate the need for the FPM. Initial results were derived using analytical techniques and simulation analysis tools. Results from the preliminary analysis were validated using our 6 DOF simulation.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Thruster configurations for maneuvering heavy payloads


    Beteiligte:


    Erscheinungsdatum :

    1991-01-01


    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Keine Angabe


    Sprache :

    Englisch




    Thruster configurations for maneuvering heavy payloads

    Tsugawa, Roy K. / Draznin, Michael E. / Dabney, Richard W. | NTRS | 1991



    Thruster Configurations for Maneuvering Heavy Payloads

    R. K. Tsugawa / M. E. Draznin / R. W. Dabney | NTIS | 1991


    Thruster Configurations for Maneuvering Heavy Payloads (Abstract Only)

    R. K. Tsugawa / M. E. Draznin / R. W. Dabney | NTIS | 1991