This document is a preliminary design of a High Speed Civil Transport (HSCT) named the RTJ-303. It is a 300 passenger, Mach 1.6 transport with a range of 5000 nautical miles. It features four mixed-flow turbofan engines, variable geometry oblique wing, with conventional tail-aft control surfaces. The preliminary cost analysis for a production of 300 aircraft shows that flyaway cost would be 183 million dollars (1992) per aircraft. The aircraft uses standard jet fuel and requires no special materials to handle aerodynamic heating in flight because the stagnation temperatures are approximately 130 degrees Fahrenheit in the supersonic cruise condition. It should be stressed that this aircraft could be built with today's technology and does not rely on vague and uncertain assumptions of technology advances. Included in this report are sections discussing the details of the preliminary design sequence including the mission to be performed, operational and performance constraints, the aircraft configuration and the tradeoffs of the final choice, wing design, a detailed fuselage design, empennage design, sizing of tail geometry, and selection of control surfaces, a discussion on propulsion system/inlet choice and their position on the aircraft, landing gear design including a look at tire selection, tip-over criterion, pavement loading, and retraction kinematics, structures design including load determination, and materials selection, aircraft performance, a look at stability and handling qualities, systems layout including location of key components, operations requirements maintenance characteristics, a preliminary cost analysis, and conclusions made regarding the design, and recommendations for further study.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    RTJ-303: Variable geometry, oblique wing supersonic aircraft


    Beteiligte:
    Antaran, Albert (Autor:in) / Belete, Hailu (Autor:in) / Dryzmkowski, Mark (Autor:in) / Higgins, James (Autor:in) / Klenk, Alan (Autor:in) / Rienecker, Lisa (Autor:in)

    Erscheinungsdatum :

    1992-05-29


    Medientyp :

    Report


    Format :

    Keine Angabe


    Sprache :

    Englisch




    RTS-303: Variable Geometry, Oblique Wing Supersonic Aircraft

    A. Antaran / H. Belete / M. Dryzmkowski et al. | NTIS | 1992


    Oblique-wing supersonic aircraft

    Jones, R. T. | NTRS | 1976


    Design of a small supersonic oblique-wing transport aircraft

    TORENBEEK, EGBERT / VAN DER VELDEN / ALEXANDER J. M. | AIAA | 1989


    Oblique Wing Aircraft

    Torenbeek, Egbert | Wiley | 2020