A six degree-of-freedom (DOF) isolation system using six LIVE units has been installed under an Army/NASA contract on a Bell 206LM helicopter. This system has been named the Total Rotor Isolation System, or TRIS. To determine the effectiveness of TRIS in reducing helicopter vibration, a flight verification study was conducted at Bell's Flight Research Center in Arlington, Texas. The flight test data indicate that the 4/rev vibration level at the pilot's seat were suppressed below the 0.04g level throughout the transition envelope. Flight tests indicate over 95% suppression of vibration level from the rotor hub to the pilot's seat. The TRIS installation was designed with a decoupled control system and has shown a significant improvement in aircraft flying qualities, such that it permitted the trimmed aircraft to be flown hands-off for a significant period of time, over 90 seconds. The TRIS flight test program has demonstrated a system that greatly reduces vibration levels of a current-generation helicopter, while significantly improving the flying qualities to a point where stability augmentation is no longer a requirement.
Ground and flight test results of a total main rotor isolation system
1987-07-01
Report
Keine Angabe
Englisch
Total rotor isolation system (TRIS) flight test results
NTRS | 1986
|Representative Test Results from HELINOVI Aeroacoustic Main Rotor/Tail Rotor/Fuselage Test in DNW
British Library Conference Proceedings | 2005
|Survey of TIGER Main Rotor Loads from Design to Flight Test
British Library Conference Proceedings | 1997
|