Advanced aircraft turbine engine combustor technology was used to reduce low-power emissions of carbon monoxide and unburned hydrocarbons to levels significantly lower than those which were achieved with current technology. Three combustor design concepts, which were designated as the hot-wall liner concept, the recuperative-cooled liner concept, and the catalyst converter concept, were evaluated in a series of CF6-50 engine size 40 degree-sector combustor rig tests. Twenty-one configurations were tested at operating conditions spanning the design condition which was an inlet temperature and pressure of 422 K and 304 kPa, a reference velocity of 23 m/s and a fuel-air-ration of 10.5 g/kg. At the design condition typical of aircraft turbine engine ground idle operation, the best configurations of all three concepts met the stringent emission goals which were 10, 1, and 4 g/kg for CO, HC, and Nox, respectively.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Aircraft gas turbine low-power emissions reduction technology program


    Beteiligte:
    Dodds, W. J. (Autor:in) / Gleason, C. C. (Autor:in) / Bahr, D. W. (Autor:in)

    Erscheinungsdatum :

    01.10.1978


    Medientyp :

    Report


    Format :

    Keine Angabe


    Sprache :

    Englisch




    Combustor concepts for aircraft gas turbine low-power emissions reduction

    MULARZ, E. / GLEASON, C. / DODDS, W. | AIAA | 1978


    Combustor Concepts for Aircraft Gas Turbine Low-Power Emissions Reduction

    Edward J. Mularz / Clifford C. Gleason / Willard J. Dodds | AIAA | 1979


    Combustor concepts for aircraft gas turbine low-power emissions reduction

    Mularz, E.J. / Cleason, C.C. / Dodds, W.J. | Tema Archiv | 1978


    Emissions Reduction Technology Program

    Jones, R. E. | NTRS | 1977


    Augmentor Emissions Reduction Technology Program

    W. C. Colley / M. J. Kenworthy / D. W. Bahr | NTIS | 1977