The objective of the effort described in this report was to determine the structural durability of a full-scale advanced annular turbojet combustor using ASTM A-1 type fuel and operating at conditions typical of advanced supersonic aircraft. A full-scale annular combustor of the ram-induction type was fabricated and subjected to a 325-hour cyclic endurance test at conditions representative of operation in a Mach 3.0 aircraft. The combustor exhibited extensive cracking and scoop burning at the end of the test program. But these defects had no appreciable effect on combustor performance, as performance remained at a high level throughout the endurance program. Most performance goals were achieved with pressure loss values near 6% and 8%, and temperature rise variation ratio (deltaTVR) values near 1.25 and l.22 at takeoff and cruise conditions, respectively. Combustion efficiencies approached l004 and the exit radial temperature profiles were approximately as desired.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Development of an Advanced Annular Combustor


    Beteiligte:
    Rusnak, J. P. (Autor:in) / Shadowen, J. H. (Autor:in)

    Erscheinungsdatum :

    30.05.1969


    Medientyp :

    Report


    Format :

    Keine Angabe


    Sprache :

    Englisch




    Development of an Annular Reverse-Flow Combustor

    Opdyke, George | SAE Technical Papers | 1962



    Thermoacoustic analysis of annular combustor

    Krebs, Werner / Walz, Guenther / Hoffmann, Stefan | AIAA | 1999


    Performance of Annular Combustor-Dump Diffusers

    C. R. Fishenden / S. J. Stevens | AIAA | 1977


    Experiment of Rocket-Ram Annular Combustor

    Yatsuyanagi, N. / Sakamoto, H. / Sato, K. et al. | British Library Conference Proceedings | 1993