A variation of a hanging pendulum thrust stand capable of measuring the performance of an electric thruster operating in the vertical orientation is presented. The vertical orientation of the thruster dictates that the thruster must be horizontally offset from the pendulum pivot arm, necessitating the use of a counterweight system to provide a neutrally-stable system. Motion of the pendulum arm is transferred through a balance mechanism to a secondary arm on which deflection is measured. A non-contact light-based transducer is used to measure displacement of the secondary beam. The members experience very little friction, rotating on twisting torsional pivots with oscillatory motion attenuated by a passive, eddy current damper. Displacement is calibrated using an in situ thrust calibration system. Thermal management and self-leveling systems are incorporated to mitigate thermal and mechanical drifts. Gravitational restoring force and torsional spring constants associated with flexure pivots provide restoring moments. An analysis of the design indicates that the thrust measurement range spans roughly four decades, with the stand capable of measuring thrust up to 12 N for a 200 kg thruster and up to approximately 800 mN for a 10 kg thruster. Data obtained from calibration tests performed using a 26.8 lbm simulated thruster indicated a resolution of 1 mN on 100 mN-level thrusts, while those tests conducted on 200 lbm thruster yielded a resolution of roughly 2.5 micro at thrust levels of 0.5 N and greater.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Thrust Stand for Vertically Oriented Electric Propulsion Performance Evaluation


    Beteiligte:
    T. Moeller (Autor:in) / K. A. Polzin (Autor:in)

    Erscheinungsdatum :

    2010


    Format / Umfang :

    11 pages


    Medientyp :

    Report


    Format :

    Keine Angabe


    Sprache :

    Englisch





    Thrust Stand for Electric Propulsion Performance Evaluation

    Markusic, Thomas / Jones, Jonathon / Cox, M. | AIAA | 2004


    Pulsed Electric Propulsion Thrust Stand Calibration Method

    A. R. Wong / A. Polzin / J. Boise Pearson | NTIS | 2011


    Pulsed Electric Propulsion Thrust Stand Calibration Method

    Wong, Andrea R. / Polzin, Kurt A. / Pearson, J. Boise | NTRS | 2011


    Milli-Newton thrust stand for electric propulsion.
    Milli-Newton thrusters stand for electric propulsion

    Mirczak, Jareb D. (Jareb Douglas), 1979- | DSpace@MIT | 2003

    Freier Zugriff