The Advanced Electric Propulsion System (AEPS) program will develop a flight 13kW Hall thruster propulsion system based on NASA's HERMeS thruster. The AEPS system includes the Hall Thruster, the Power Processing Unit (PPU) and the Xenon Flow Controller (XFC). These three primary components must operate together to ensure that the system generates the required combinations of thrust and specific impulse at the required system efficiencies for the desired system lifetime. At the highest level, the AEPS system will be integrated into the spacecraft and will receive power, propellant, and commands from the spacecraft. Power and propellant flow rates will be determined by the throttle set points commanded by the spacecraft. Within the system, the major control loop is between the mass flow rate and thruster current, with time-dependencies required to handle all expected transients, and additional, much slower interactions between the thruster and cathode temperatures, flow controller and PPU. The internal system interactions generally occur on shorter timescales than the spacecraft interactions, though certain failure modes may require rapid responses from the spacecraft. The AEPS system performance model is designed to account for all these interactions in a way that allows evaluation of the sensitivity of the system to expected changes over the planned mission as well as to assess the impacts of normal component and assembly variability during the production phase of the program. This effort describes the plan for the system performance model development, correlation to NASA test data, and how the model will be used to evaluate the critical internal and external interactions. The results will ensure the component requirements do not unnecessarily drive the system cost or overly constrain the development program. Finally, the model will be available to quickly troubleshoot any future unforeseen development challenges.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Development of a 13 kW Hall Thruster Propulsion System Performance Model for AEPS


    Beteiligte:
    S. Stanley (Autor:in) / M. Allen (Autor:in) / K. Goodfellow (Autor:in) / G. Chew (Autor:in) / R. Rapetti (Autor:in) / T. Tofil (Autor:in) / D. Herman (Autor:in) / J. Jackson (Autor:in) / R. Myers (Autor:in)

    Erscheinungsdatum :

    2017


    Format / Umfang :

    15 pages


    Medientyp :

    Report


    Format :

    Keine Angabe


    Sprache :

    Englisch




    Development of a 13 kW Hall Thruster Propulsion System Performance Model for AEPS

    Stanley, Steven B. / Chew, Gilbert / Rapetti, Ryan et al. | AIAA | 2017


    Development of a 13 kW Hall Thruster Propulsion System Performance Model for AEPS

    Stanley, Steven / Allen, May / Goodfellow, Keith et al. | NTRS | 2017


    Development of a 13 kW Hall Thruster Propulsion System Performance Model for AEPS (AIAA 2017-4726)

    Stanley, Steven B. / Chew, Gilbert / Rapetti, Ryan et al. | British Library Conference Proceedings | 2017


    Overview of the Development of the Advanced Electric Propulsion System (AEPS)

    Herman, Daniel / Tofil, Todd / Santiago, Walter et al. | NTRS | 2017


    Overview of the Development and Mission Application of the Advanced Electric Propulsion System (AEPS)

    Herman, Daniel A. / Tofil, Todd / Santiago, Walter et al. | NTRS | 2017