This work explores the use of alternative internal structural designs within a full-scale wing box structure for aeroelastic tailoring, with a focus on curvilinear spars, ribs, and stringers. The baseline wing model is a fully-populated, cantilevered wing box structure of the Common Research Model (CRM). Metrics of interest include the wing weight, the onset of dynamic flutter, and the static aeroelastic stresses. Twelve parametric studies alter the number of internal structural members along with their location, orientation, and curvature. Additional evaluation metrics are considered to identify design trends that lead to lighter-weight, aeroelastically stable wing designs. The best designs of the individual studies are compared and discussed, with a focus on weight reduction and flutter resistance. The largest weight reductions were obtained by removing the inner spar, and performance was maintained by shifting stringers forward and/or using curvilinear ribs: 5.6% weight reduction, a 13.9% improvement in flutter speed, but a 3.0% increase in stress levels. Flutter resistance was also maintained using straight-rotated ribs although the design had a 4.2% lower flutter speed than the curved ribs of similar weight and stress levels were higher. For some configurations, the differences between curved and straight ribs were smaller, which provides motivation for future optimization-based studies to fully exploit the trade-offs.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Internal Structural Design of the Common Research Model Wing Box for Aeroelastic Tailoring


    Beteiligte:
    C. V. Jutte (Autor:in) / B. K. Stanford (Autor:in) / C. D. Wieseman (Autor:in)

    Erscheinungsdatum :

    2015


    Format / Umfang :

    48 pages


    Medientyp :

    Report


    Format :

    Keine Angabe


    Sprache :

    Englisch




    Internal Structural Design of the Common Research Model Wing Box for Aeroelastic Tailoring

    Jutte, Christine V. / Stanford, Bret K. / Wieseman, Carol D. | NTRS | 2015



    Morphing wing design via aeroelastic tailoring

    Herencia, J. / Weaver, Paul / Friswell, Mike | AIAA | 2007


    Aeroelastic Tailoring of Metallic Wing Structures

    Harmin, M. / Abdelkader, A. / Cooper, J. et al. | British Library Conference Proceedings | 2011


    Aeroelastic Tailoring of Joined-Wing Configurations

    Weisshaar, Terrence / Lee, D-H. | AIAA | 2002