This paper describes how a 3 stage turbocharged gasoline engine was selected to power NASA's atmospheric science unmanned aircraft now under development. The airplane, whose purpose is to fly sampling instruments through targeted regions of the upper atmosphere at the exact location and time (season, time of day) where the most interesting chemistry is taking place, must have a round trip range exceeding 1000 km, carry a payload of about 500 lb to altitudes exceeding 80 kft over the site, and be able to remain above that altitude for at least 30 minutes before returning to base. This is a subsonic aircraft (the aerodynamic heating and shock associated with supersonic flight could easily destroy the chemical species that are being sampled) and it must be constructed so it will operate out of small airfields at primitive remote sites worldwide, under varying climate and weather conditions. Finally it must be low cost, since less than $50 M is available for its development. These requirements put severe constraints on the aircraft design (for example, wing loading in the vicinity of 10 psf) and have in turn limited the propulsion choices to already-existing hardware, or limited adaptations of existing hardware. The only candidate that could emerge under these circumstances was a propeller driven aircraft powered by spark ignited (SI) gasoline engines, whose intake pressurization is accomplished by multiple stages of turbo-charging and intercooling. Fortunately the turbocharged SI powerplant, owing to its rich automotive heritage and earlier intensive aero powerplant development during WWII, enjoys in addition to its potentially low development costs some subtle physical advantages (arising from its near-stochiometric combustion) that may make it smaller and lighter than either a turbine engine or a diesel for these altitudes. Just as fortunately, the NASA/industry team developing this aircraft includes the same people who built multi-stage turbocharged SI powerplants for unmanned military spyplanes in the early 1980's. Now adapting hardware developed for reconaissance at 65-70 kft to the interests of atmospheric science at 80-90 kft, their efforts should yield an aero powerplant that pushes the altitude limits of subsonic air breathing propulsion.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Propulsion Selection for 85kft Remotely Piloted Atmospheric Science Aircraft


    Beteiligte:
    D. J. Bents (Autor:in) / T. Mockler (Autor:in) / J. Maldonado (Autor:in) / A. Hahn (Autor:in) / J. Cyrus (Autor:in)

    Erscheinungsdatum :

    1996


    Format / Umfang :

    20 pages


    Medientyp :

    Report


    Format :

    Keine Angabe


    Sprache :

    Englisch




    Propulsion Selection for 85kft Remotely Piloted Atmospheric Science Aircraft

    Bents, David J. / Mockler, Ted / Maldonado, Jaime et al. | NTRS | 1996


    Propulsion Selection for 85 kft Remotely Piloted Atmospheric Science Aircraft

    Bents, D. J. / Mockler, T. / Maldonado, J. et al. | British Library Conference Proceedings | 1996


    REMOTELY PILOTED AIRCRAFT

    RICCI JACOPO | Europäisches Patentamt | 2016

    Freier Zugriff

    Remotely Piloted Aircraft Systems

    Alan Neville Hobbs | NTRS | 2022


    REMOTELY PILOTED AIRCRAFT SYSTEM

    FALDER STEPHEN / ROBERTS TIMOTHY / JOLLEY DAVID | Europäisches Patentamt | 2019

    Freier Zugriff