Typical dual-mode scramjet designs employ an isolator component situated between the inlet and combustor. The isolator fluidically buffers the inlet from the combustor via the formation of a shock train, an interconnected series of shock-boundary layer interactions. The isolator is required during ramjet-engine operation and at the lower edges of the scramjet operational envelope. In an operational engine, transient behavior imposes fluidic dynamics due to attitude adjustments, combustor throttling, aberrant resonances within the combustor, etc. To accommodate these transients, the shock train adjusts on both temporal and spatial scales. Sufficiently large downstream pressure increases in the combustor play a critical role during unstart, whereby strong compression waves propagate upstream in the isolator to ultimately force the shock train out the inlet, if it cannot stabilize to the pressure increase. This critically reduces the engine mass flow rate, potentially causing a catastrophic reduction in thrust and loss of the vehicle. A nearly instantaneous unstart can, in principle, be predicted by a ratio of the normal shock pressure jump in an inviscid isolator. However, lower-magnitude perturbations, below this bound, also induce unstarts. Understanding the transient behavior inherent in unsteady isolator operation is critical to reducing safety margin in isolator length and refining engine control algorithms to improve engine performance. The Isolator Dynamics Research Lab (IDRL) is a cold-flow, direct-connect isolator facility ideal for assessing the fundamental fluid dynamics of shock trains. The internal flow of a scramjet isolator is modeled using a 2D, symmetric Mach 2.5 nozzle followed by a 695 mm long, 25.4x50.8 mm rectangular isolator test section. A blockage cone on a high-speed ball screw actuator downstream of the isolator is pulsed to simulate the throttling behavior in an operational combustor. Wall flush high-speed static pressure transducers detect the streamwise shock train within the isolator. Time delays between the onset of the throttling and the response motion of the shock train are analyzed to assess the controlling scales and parameters. From this analysis, the response time of the isolator shock train system is found to depend primarily on the isolator back pressure time-rate-of-change but quickly saturates to a maximum propagation speed along the isolator. These results inform dual-mode scramjet engine designers of the critical parameters and limits of an unstart resistant engine.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Isolator Shock Train Response to Dual-Mode Scramjet Throttling-Like Forcing


    Beteiligte:
    L. M. Edelman (Autor:in)

    Erscheinungsdatum :

    2024


    Format / Umfang :

    18 pages


    Medientyp :

    Report


    Format :

    Keine Angabe


    Sprache :

    Englisch




    Scramjet Isolator Shock Train Location Techniques

    Hutzel, John / Decker, Douglas / Cobb, Richard et al. | AIAA | 2011


    SCRAMJET ISOLATOR SHOCK TRAIN LOCATION TECHNIQUES

    Hutzel, J. / Decker, D. / Cobb, R. et al. | British Library Conference Proceedings | 2011


    Scramjet Isolator Shock-Train Leading-Edge Location Modeling

    Hutzel, J. / Decker, D. / Donbar, J. et al. | British Library Conference Proceedings | 2011


    Scramjet Isolator Shock-Train Leading-Edge Location Modeling

    Hutzel, John / Decker, Douglas / Donbar, Jeffrey | AIAA | 2011


    CFD Modeling of an Isolator Shock Train in a Scramjet Engine

    Hoeger, Troy / King, Paul / Decker, Douglas et al. | AIAA | 2010