A series of marine fouling experiments was conducted at Freeport, Texas, on two single-pass titanium heat exchangers. The exchangers, which were constructed with commercially pure titanium tubes (5/8-inch (1.59-centimeter)) outside diameter by 30-inch (76.3-centimeter length) and 6Al-4V alloy tube sheets and headers, were operated on natural seawater. One of the exchangers was fed electrolytically chlorinated seawater, while the other was run with untreated seawater feed. Velocity and chlorination levels were varied to determine the effect of these two variables on fouling of the titanium surfaces. Operating conditions similar to those that might be expected in shipboard heat exchanger/condenser usage were modeled.
Marine Fouling of Titanium Heat Exchangers
1976
28 pages
Report
Keine Angabe
Englisch
Marine fouling of titanium heat exchangers
Tema Archiv | 1976
|Fouling in naval condensers and heat exchangers
Tema Archiv | 1979
|Probe Measures Fouling As In Heat Exchangers
NTRS | 1990
|Air side fouling of compact heat exchangers
British Library Conference Proceedings | 2002
|Estimation and Control of Fouling in Heat Exchangers
British Library Conference Proceedings | 1995
|