Tests were made to evaluate a proposed technique for removing ice from lock walls during winter navigation. The technique involves use of a high-pressure water jet to slice through ice collars that adhere to vertical walls. The test equipment consisted of: (1) A jet lance tipped with a nozzle designed to produce a long coherent jet; (2) A small tractor (hydraulically driven) to carry the lance; and (3) A high-pressure pump unit to supply water to the lance. Tests were made with operating pressures from 3,000 to 14,000 lbf/sq in. and nozzle diameters from 0.063 to 0.152 in. Most of the work involved pressures around 9,000 lbf/sq in. and nozzle diameters of approximately 0.09 in. Traverse speeds were in the range 3 to 17 ft/min. Jet penetrations of up to 4 ft. were achieved in a single pass, and the equipment proved capable of cleaning the lock wall under the prevailing conditions. However, performance was somewhat less favorable than had been predicted, and a revised scheme involving changes in lock operating procedures was proposed. (Author)


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Lock Wall Deicing with Water Jets: Field Tests at Ship Locks in Montreal, Canada, and Sault Ste. Marie, Michigan


    Beteiligte:
    W. H. Brierley (Autor:in) / D. J. Calkins (Autor:in) / S. L. DenHartog (Autor:in) / M. Mellor (Autor:in) / H. T. Ueda (Autor:in)

    Erscheinungsdatum :

    1975


    Format / Umfang :

    19 pages


    Medientyp :

    Report


    Format :

    Keine Angabe


    Sprache :

    Englisch




    Locks at Sault Ste. Marie, Michigan

    Dillon, L.S. | Engineering Index Backfile | 1931



    Accident to Sault Ste. Marie locks

    Engineering Index Backfile | 1890


    The new ship canal and locks at Sault Sainte Marie

    Mills, James Cooke | Engineering Index Backfile | 1911


    Ship canal at Sault Ste Marie, Canada

    Engineering Index Backfile | 1895