Models of three practical oblique-wing transport configurations were tested in the NASA Ames 11 foot wind tunnel. The three configurations used a common forward fuselage, wing, and support system but employed different aft fuselage sections simulating alternate propulsion system installations. These included an integrated propulsion system, pylon-mounted nacelles, and clean (no propulsion system) configuration. The tests were conducted over a Mach number range from 0.6 to 1.4 and at sweep angles from 0 to 60 degrees. The nominal unit Reynolds number was 1.83 million per meter and the angle of attack range was -3 to +6 degrees. The models were mounted in the tunnel by means of a lower blade support system. The interference effects of this lower blade and the flow inclination were determined by using an image blade system and testing the configuration in both the upright and inverted positions.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Wind Tunnel Investigation of an Oblique Wing Transport Model at Mach Numbers Between 0.6 and 1.4


    Beteiligte:
    R. L. Black (Autor:in) / J. K. Beamish (Autor:in) / W. K. Alexander (Autor:in)

    Erscheinungsdatum :

    1975


    Format / Umfang :

    334 pages


    Medientyp :

    Report


    Format :

    Keine Angabe


    Sprache :

    Englisch





    Wind Tunnel Study of Oblique Wing Missile Model

    Dillsaver, M. / Franke, M. / American Institute of Aeronautics and Astronautics | British Library Conference Proceedings | 2008


    Wind Tunnel Study of Oblique Wing Missile Model

    Dillsaver, Matthew / Franke, Milton | AIAA | 2008


    An experimental investigation of an oblique-wing and body combination at Mach numbers between 0.60 and 1.40

    Graham, Lawrence A. / Jones, Robert T. / Boltz, Frederick W. | TIBKAT | 1972


    Transonic Wind-Tunnel Test Of An Oblique Wing

    Kennelly, R. A. / Strong, J. M. / Carmichael, R. L. et al. | NTRS | 1992