A new method for controlling road noise transmitted through the suspension system of an automobile was developed, using a Lincoln LS automobile as the target vehicle. In this vehicle, road surface roughness generates vibrations that are transmitted into the automobile primary through a single bushing (the "point 4 bushing") on each of the front suspension control arms. An electromagnetic actuator was designed, built, and tested on a Lincoln LS with simulated roads noise. The actuator applies a force across the point 4 bushing, in response to accelerations of the vehicle frame, just inboard of the bushing, with the goal of reducing the net forces transmitted into the vehicle frame, which ultimately produce unwanted interior noise. Several tonal controllers were developed, each designed to operate in a narrow frequency band, and to eliminate the cross member (frame) vibration just inside the point 4 bushing. The tonal controllers were able to eliminate cross member vibration at the desired frequency. Eliminating the cross member vibration resulted in modest reductions interior sound levels. A successful vibration control system (in this vehicle) would need to eliminate cross member vibrations over frequency range 100 to 200 Hz. However, a broadband controller with this electromagnetic actuator system proved to be difficult, due to undesirable non-minimum phase dynamics.


    Zugriff

    Download


    Exportieren, teilen und zitieren



    Titel :

    Active control of an automobile suspension system for reduction of vibration and noise


    Beteiligte:

    Erscheinungsdatum :

    2005


    Format / Umfang :

    82 pages , 1195099 byte , 3064928 byte


    Anmerkungen:

    Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2005.
    This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.
    Includes bibliographical references (p. 79-82).


    Medientyp :

    Hochschulschrift


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Vibration reduction control method for automobile active suspension

    ZHU BING | Europäisches Patentamt | 2023

    Freier Zugriff

    NOISE REDUCTION SYSTEM AND NOISE REDUCTION METHOD FOR AUTOMOBILE SUSPENSION

    PARK JAEWAN / KIM NAMHYEON | Europäisches Patentamt | 2025

    Freier Zugriff

    Automobile active noise reduction system

    ZHOU JISHUANG | Europäisches Patentamt | 2022

    Freier Zugriff

    Engine suspension vibration reduction structure and system and automobile

    TIAN XIN / QU SHAOJU / LI XING et al. | Europäisches Patentamt | 2021

    Freier Zugriff

    Automobile active suspension system

    ZHANG FUJUN / MAO CHENJIAN | Europäisches Patentamt | 2021

    Freier Zugriff