To achieve the necessary interferometric baseline for the recent Shuttle Radar Topography Mission (SRTM), an outboard radar antenna was deployed using a 60 meter mast from a main radar antenna in the shuttle payload bay. The mast had dominant flexible modes around 0.1 Hz with tip displacements on the order of several centimeters in response to shuttle thrusters. Continuous knowledge of the mast tip position to submillimeter accuracy and antenna orientation to an accuracy of 100 arcseconds (1.6 sigma) was necessary to meet the fundamental SRTM requirements. The selected approach involved an optical metrology camera which tracked three LED targets located on the outboard antenna structure. The metrology camera was required to generate target centroid coordinates (in CCD frame) with a relative accuracy of 0.8 arcsec, 1 sigma. This paper provides a description of the metrology camera, the process used to prepare it for flight on SRTM, the LED target development effort, test and alignment issues, and the observed in-flight performance.
The SRTM sub-arcsecond metrology camera
2001 IEEE Aerospace Conference Proceedings (Cat. No.01TH8542) ; 4 ; 4/2037-4/2046 vol.4
01.01.2001
1150745 byte
Aufsatz (Konferenz)
Elektronische Ressource
Englisch
The SRTM Sub-arcsecond metrology camera
NTRS | 2000
|The SRTM sub-arcsecond metrology camera
NTRS | 2000
|The Micro-arcsecond Metrology Testbed (MAM)
NTRS | 1998
|SRTM metrology system: flight results
NTRS | 2000
|SRTM Metrology System: Preliminary Flight Results
NTRS | 2000
|