This paper examines the thermal characteristics of multilayer TiO2/8YSZ coated and uncoated carbide cutting inserts. Turning tests were conducted on a carbide insert at a cutting depth of 0.1 mm, four cutting speeds 88, 112, 141, and 172 m/min, and two feeds 0.065 and 0.265 mm/rev. Measurements were made of tool life, flank wear breadth, and temperature variations at the insert tip. It has been demonstrated that the multi-layer coating significantly reduces flank wear and temperature during cutting. The life of the inserts was doubled by the performed coating. Grey Relational Analysis (GRA), based on the Taguchi Method was used to investigate the impact of coatings and turning conditions on cutting performance. The best possible rating for the grey relationship category was 88m/min, and 0.065 mm/rev.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Improvement the Performance of Carbide Cutting Tool by YSZ Coating


    Beteiligte:


    Erscheinungsdatum :

    2023-07-18


    Format / Umfang :

    584724 byte




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch



    Effect of cementite carbide tool coating type and tool radius on cutting performance

    Yildiz, Tugce / Irez, Alaeddin Burak / Sur, Gokhan | IEEE | 2016


    Advanced carbide cutting tool technology

    Emerald Group Publishing | 2000


    Estimation of Tool Wear of Carbide Tool in Orthogonal Cutting Using FEM Simulation

    Yen, Y.-C. / Sohner, J. / Weule, H. et al. | British Library Online Contents | 2003


    Coating of Tool Steels with Niobium Carbide by TRD Process

    Sricharoenchai, P. / Pornnimitthum, S. / Bhandhubanyong, P. | British Library Conference Proceedings | 1999