We report a new fabrication process for periodically poled LiNbO/sub 3/ (PPLN)-the contact electrode method (CEM)-in which the periodic electrode is pressed onto one of the substrate surfaces with a uniform electrode on the other. CEM does not need any photolithographic processes on the substrate surface which may lead to greatly reduced fabrication cost. With this method bulk PPLN has been successfully fabricated with a period of 6.58 /spl mu/m for frequency doubling a Nd:YAG fundamental wavelength of 1.064 /spl mu/m over an interaction length of 3 mm using z-cut 0.3 mm-thickness LiNbO/sub 3/ substrates. The uniformity of the PPLN was verified from the dependence of SH power on the temperature, and 62.5 mW of green light was generated for an input fundamental power of 3.2 W.
Contact electrode method for bulk periodically poled LiNbO/sub 3/
01.01.1997
205075 byte
Aufsatz (Konferenz)
Elektronische Ressource
Englisch
Contact Electrode Method for Bulk Periodically Poled LiNbO~3
British Library Conference Proceedings | 1997
|CW Diode-Pumped OPO in Bulk Periodically Poled LiNbO~3
British Library Conference Proceedings | 1995
|Long Pulse OPO Based on Bulk Periodically-Poled LiNbO~3
British Library Conference Proceedings | 1995
|1.047m Synchronously Pumped Optical Parametric Oscillator in Bulk Periodically Poled LiNbO~3
British Library Conference Proceedings | 1996
|