The results of research and development of the test sample of a radio-wave device for vehicle movement parameters monitoring are summarized in this report. The device has been designed for the quick and precise control of a vehicle brake system in stationary (at car repair stations, automobile factories) as well as in road conditions. The autonomous device consists of a portable receiving-transmitting three-beam monounit, brake pedal pressure sensor and a central unit, The radar monounit is based on the autodyne receiving-transmitting modules which are connected with three antennas. Each of the antennas has a 60/spl deg/-slope to the underlying surface and the second antenna is turned by 35/spl deg/ from the plane passing through the first and the third antennas. The aperture diameter of each antenna is 50 mm. The device is used as follows: the pressure sensor is fastened to a brake pedal, the three-beam autodyne radio-locator monounit is hitched to the side surface of the vehicle body by means of a magnetic system.
Automobile brake system monitoring device based on EHF autodyne generators
01.01.2000
475991 byte
Aufsatz (Konferenz)
Elektronische Ressource
Englisch
AUTOMOBILE BRAKE SYSTEM MONITORING DEVICE BASED ON EHF AUTODYNE GENERATORS
British Library Conference Proceedings | 2000
|Die neue elektrische Maschine "Autodyne"
TIBKAT | 1957
|Multipurpose cw CO~2 autodyne lidar
British Library Conference Proceedings | 1995
|Automobile front axle parking brake device and automobile parking brake system
Europäisches Patentamt | 2015
|