The demand for higher power density in electric traction applications has led to compact design requirements for traction drives complicating its thermal management. Therefore, the traction drive's thermal management has to be addressed by its design and/or control. Normally, the traction inverter becomes the bottleneck in providing the transient rated peak torque at zero and near zero speeds due to peak current conduction for longer fundamental frequency cycles. This paper presents thermal management strategies based on both current limitation and on an alternate modulation scheme that redistributes the losses between the IGBTs and diodes of the highest current carrying leg at very low modulation indices. The presented strategies avoid or delay the over-temperature junction failure due to high conduction losses. The proposed strategies enable the drive to provide the rated peak torque at zero or near zero speeds while avoiding or delaying thermal failure.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Thermal management during stalled rotor by conduction loss redistribution


    Beteiligte:
    Ali, Syed Q. (Autor:in) / Bhattacharya, Subhadeep (Autor:in) / Mascarella, Diego (Autor:in) / Joos, Geza (Autor:in)


    Erscheinungsdatum :

    01.06.2015


    Format / Umfang :

    1704059 byte




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch



    CALCULATION OF ROTOR PERFORMANCE AND LOADS UNDER STALLED CONDITIONS

    Yeo, H. / American Helicopter Society | British Library Conference Proceedings | 2003



    Analysis of aerodynamics and main rotor loads under stalled conditions of helicopter’s main rotor during the pull-up manoeuvre

    Kowaleczko Grzegorz / Kwaśniak Tomasz / Nowakowski Mirosław et al. | DOAJ | 2018

    Freier Zugriff