We demonstrated passively Q-switched operation of the Bessel-Gauss laser. To prevent excessive thermal load on the laser crystal, we used a quasi-CW pumping consisting of 1-ms pulses at a 200-Hz repetition rate. The pump power level was adjusted so that a single Q-switched pulse was obtained from a single pump pulse. By adding a Cr/sup 4+/:YAG crystal with an initial transmission of T/sub 0/=90% to the 80-mm cavity, we obtained two beams of 30-ns Bessel-Gauss pulses with a pulse energy of 3 /spl mu/J. The one- and two-dimensional profiles of these Bessel-Gauss pulses at different distances from the waist were similar to those of the corresponding CW beam. By using a Cr/sup 4+/:YAG crystal with T/sub 0/=45% and shortening the cavity length to 38 mm, 3-ns-long, 7.5-/spl mu/J pulses were generated. We observed, however, that the far-field pattern of these short pulses was somewhat different from that of the CW beam.
CW and pulsed operation of a diode-pumped Bessel-Gauss laser
2005-01-01
853164 byte
Aufsatz (Konferenz)
Elektronische Ressource
Englisch
High Efficiency, Pulsed Diode-Pumped Two Micron Laser
British Library Conference Proceedings | 1994
|Resonator with Bessel-Gauss modes [4353-24]
British Library Conference Proceedings | 2001
|Laser Resonators with Bessel-Gauss Modes: Design and Analysis [3573-167]
British Library Conference Proceedings | 1998
|IEEE | 2005
|Diode-pumped Nd:CaGdAlO4 laser
IEEE | 1997
|