The concrete gravity ogee spillway for the Burnsville Dam will contain three 42-ft-wide gate bays separated by 8-ft wide piers. Outlet works consisting of five low-level and three water-quality sluices will discharge on the downstream slope of the spillway. A hydraulic-jump type stilling basin will provide satisfactory dissipation of the energy of the spillway and sluice flows. A 1:40-scale model of the spillway, sluices, stilling basin, approach area, and exit channel was used to study the overall hydraulic performance of the structure. Tests indicated that flow conditions in the approach to the spillway with both uncontrolled and controlled flows were satisfactory for the full range of anticipated discharges. The stilling basin performed satisfactorily for spillway flows, and the only structural modification recommended was the elimination of the wing walls at the end of the basin. An eddy developed in the basin during operation of the five low-level sluices because the unsymmetrical location of the sluices along the spillway created an uneven distribution of flow entering the basin. Operation of the right water-quality sluice simultaneously with the five low-level sluices resulted in satisfactory stilling basin performance. The size and extent of stone protection required on the dam embankment, side slopes of the exit channel, Fisherman's Bridge, and Fisherman's Weir were determined by model investigations.
Spillway for Burnsville Dam, Little Kanawha River, West Virginia: Hydraulic Model Investigation
Technical Report ; H-75-5
1975
9926708
Report
Elektronische Ressource
Englisch
Capacity Studies of Winfield Locks, Kanawha River, West Virginia
HENRY – Bundesanstalt für Wasserbau (BAW) | 1977
|HENRY – Bundesanstalt für Wasserbau (BAW) | 1983
|Spillway and Outlet Works, Rowlesburg Dam, Cheat River, West Virginia: Hydraulic Model Investigation
HENRY – Bundesanstalt für Wasserbau (BAW) | 1970
|