Procedimiento para fabricar una unidad de montaje constituida por una pieza perfilada (1) de metal, especialmente acero, para vehículos automóviles, con un agujereado de paso (2) para medios de fijación, y una placa de refuerzo agujereada (3) de metal, especialmente acero, que cubre el agujereado de paso (2) y que se fija a la pieza perfilada (1), recubriéndose con una capa anticorrosión la unidad de montaje constituida por la pieza perfilada (1) y la placa de refuerzo (3), caracterizado por que la placa de refuerzo (3) se dispone en una posición de premontaje a una distancia tipo rendija (4) de la pieza perfilada (1) y solamente se la une con la pieza perfilada (1) en al menos una zona parcial, y por que la capa de protección anticorrosión se aplica sobre la unidad de montaje situada en la posición de premontaje, apretándose herméticamente la placa de refuerzo (3) contra la pieza perfilada (1) en la posición de nominal de montaje.

    First and second metallic parts are joined by first providing a face of the first part with a formation projecting from and forming only a limited portion of the face and then connecting the first part with the second part by fixing the formation to a face of the second part such that the formation holds the first and second parts in a preassambled position with the faces of the first and second parts confronting and out of contact with each other at a predetermined spacing. Then the two spaced and confronting faces of the first and second parts are coated, after which the first and second parts are pushed together with deformation of the formation of the first part into a final-assembly position with the coated faces pressing directly against each other. Then the first and second parts are permanently joined together.


    Zugriff

    Download


    Exportieren, teilen und zitieren



    Titel :

    Pieza perfilada para vehículos automóviles


    Beteiligte:
    KINKELBUR THOMAS (Autor:in) / FOIDL MARKUS (Autor:in) / SCHÖNEWALD NADINE (Autor:in) / STRAUTZ JOSEF (Autor:in)

    Erscheinungsdatum :

    24.04.2017


    Medientyp :

    Patent


    Format :

    Elektronische Ressource


    Sprache :

    Spanisch


    Klassifikation :

    IPC:    B62D MOTOR VEHICLES , Motorfahrzeuge



    Pieza decorativa para vehículos automóviles y procedimiento para su fabricación

    WIEGAND ANDREAS / AUGENER HEIKO | Europäisches Patentamt | 2018

    Freier Zugriff

    Pieza decorativa para automóviles

    RIBEIRO CARLOS / BAUER SASCHA | Europäisches Patentamt | 2022

    Freier Zugriff

    Muelle laminar para vehículos automóviles

    SCHÜRMANN HELMUT / KELLER TOBIAS | Europäisches Patentamt | 2017

    Freier Zugriff

    DIFUSOR DE AIRE PARA VEHICULOS AUTOMOVILES

    DE MENDONSA MAIA ANDRÉ / GURMENDI CULLA MIKEL | Europäisches Patentamt | 2022

    Freier Zugriff

    Conjunto de pedal para vehículos automóviles

    GOICURIA ASTORQUIA EGOITZ / BURGUERA ALBIZURI FERNANDO | Europäisches Patentamt | 2018

    Freier Zugriff