A corridor traction elevator capable of turning around is composed of seat frames, rotary sleeve and rotary nails, channel steel rails, metal sliding blocks, pulleys, traction ropes, sliding sleeves and winches, the seat frames are formed by welding angle iron, then the seat frames are connected through the rotary sleeve and rotary nails (similar to door and window hinges), the channel steel rails are formed in a segmented mode, and then the channel steel rails are assembled and welded. A thick pipe sleeve is welded to the center of a metal sliding block face, a plurality of horizontal balls are embedded in the bottom face of the sliding block, horizontal balls, pulleys, pulling ropes and winches are also embedded in the left edge and the right edge of the upper face of the sliding block, the sliding sleeve is fixed to the corner of the inner side of the rail through screws, and the pulleys are fixed to the top floor of a corridor and the outer side face of the rail. The winch is fixed on the ground of the bottom layer of the corridor, one end of the traction rope is hung on the front sliding block, the other end of the traction rope penetrates through the pulley on the top layer and the pulley on the outer side of the track, and the traction rope is directly communicated with the winch, a thin pipe sleeve welded to the center of the bottom of the seat frame and a thick pipe sleeve in the center of the surface of the sliding block (limited to rotate by 45 degrees).

    能拐弯的楼道牵引电梯,是由座椅架,旋套旋钉,槽钢轨道,金属滑块,滑轮,牵引绳,滑套,卷扬机组成,座椅架用三角铁焊接成型,再用旋套旋钉(类似门窗合页)把座椅架互相连接起来,槽纲轨道分段加工成型,然后再组装焊接,金属滑块面中心焊接粗管套,滑块底面嵌装多个卧滚珠,滑块上面左右两边沿,也要嵌装卧滚珠,滑轮,牵引绳,卷扬机市场选购,滑套用螺丝固定在轨道内侧的拐弯处,滑轮固定在楼道顶层地面上和轨道的外侧面,卷扬机固定在楼道底层的地面上,牵引绳一端头挂装在前面滑块上,另一端头穿过顶层的滑轮和轨道外侧滑轮,直通卷扬机,座椅架底中心焊接细管套,和滑块面中心的粗管套装(限定旋转45度)。


    Zugriff

    Download


    Exportieren, teilen und zitieren



    Titel :

    Corridor traction elevator capable of turning


    Weitere Titelangaben:

    能拐弯的楼道牵引电梯


    Beteiligte:
    YUAN BINGMING (Autor:in)

    Erscheinungsdatum :

    28.06.2024


    Medientyp :

    Patent


    Format :

    Elektronische Ressource


    Sprache :

    Chinesisch


    Klassifikation :

    IPC:    B66B Aufzüge , ELEVATORS



    Mobile trolley structure for corridor elevator and corridor elevator traction system

    DENG XUEZHONG / TANG SHENGHUI | Europäisches Patentamt | 2015

    Freier Zugriff

    Friction traction type corridor elevator system

    LIU XINKE / WANG XIMENG / SHUI WENQIANG et al. | Europäisches Patentamt | 2023

    Freier Zugriff

    Rail car traction device in corridor elevator

    DENG XUEZHONG / TANG SHENGHUI | Europäisches Patentamt | 2015

    Freier Zugriff

    Corridor elevator

    ZHU SHENGGANG | Europäisches Patentamt | 2015

    Freier Zugriff

    Corridor elevator

    LI YUEFU | Europäisches Patentamt | 2025

    Freier Zugriff