Abstract Doppler frequency estimation with high accuracy is very important for precise orbit determination and scientific studies in deep space exploration. In this paper, we propose a new method which implements cross correlation of only received signals from one single station to estimate Doppler frequency. The algorithm is relatively simple and it can achieve high accuracy even when signal to noise ratio (SNR) is very low. Moreover, the accuracy can be further improved by implementing frequency compensation, especially when the frequency dynamic range is high. Simulations were performed and results proved the validity of this method. X-band observations on MEX (Mars Express) and Juno were performed by a 13 m telescope of Wuhan University, which was equipped by two back ends, i.e. CDAS (Chinese Data Acquisition System) and RSR (Radio Science Receiver). Raw data recorded by the CDAS were processed by using the proposed method, and the estimated frequencies were in good agreement with the real time frequency estimation values by the RSR. What’s more, the accuracy by using cross correlation was higher than the one of RSR.
Using cross correlation to estimate Doppler frequency
Advances in Space Research ; 65 , 7 ; 1772-1780
2020-01-09
9 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Pulse-Burst Cross-Correlation Doppler Global Velocimetry
AIAA | 2020
|Pulse-burst cross-correlation Doppler global Velocimetry
AIAA | 2019
|British Library Conference Proceedings | 1995
|