AbstractInfluences of main structural parameters of the LOX/methane pintle injectors on atomization cone angles and combustion performances were studied by experiments and numerical simulation respectively. In addition, improvement was brought up to the structure of the pintle injectors and combustion flow fields of two different pintle engines were obtained. The results indicate that, with increase of the gas-liquid mass flow ratio, the atomization cone angle decreases. In the condition of the same gas-liquid mass flow ratio, as the thickness of the LOX-injection gap grows bigger, the atomization cone angle becomes smaller. In the opposite, when the half cone angle of the LOX-injection gap grows bigger, the atomization cone angle becomes bigger. Moreover, owing to the viscous effects of the pintle tip, with increase of the ‘skip distance’, the atomization cone angle gets larger. Two big recirculation zones in the combustor lead to combustion stability of the pintle engines. When the value of the non-dimensional ‘skip distance’ is near 1, the combustion efficiency of the pintle engines is the highest. Additionally, pintle engines with LOX injected in quadrangular slots can acquire better mixing efficiency of the propellants and higher combustion efficiency as the gas methane can pass through the adjacent slots. However, the annular-channel type of pintle injectors has an ‘enclosed’ area near the pintle tip which has a great negative influence on the combustion efficiency.

    HighlightsTwo recirculation zones lead to combustion stability of the pintle engines.The non-dimensional ‘skip distance’ should be chosen near 1 for pintle engines.LOX injected in quadrangular slots is better than the annular-channel type.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Study on atomization and combustion characteristics of LOX/methane pintle injectors


    Beteiligte:
    Fang, Xin-xin (Autor:in) / Shen, Chi-bing (Autor:in)

    Erschienen in:

    Acta Astronautica ; 136 ; 369-379


    Erscheinungsdatum :

    2017-03-27


    Format / Umfang :

    11 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch





    Review of atomization and mixing characteristics of pintle injectors

    Zhao, Fan / Zhang, Hao / Zhang, Haibin et al. | Elsevier | 2022




    PINTLE INJECTOR SPRAY ATOMIZATION: LIQUID SHEET BREAKUP QUANTIFICATION

    Erazo, Santiago / Day, Joseph A. / Gamertsfelder, Jacob et al. | TIBKAT | 2021