Abstract In recent years, the increasing demand for simple and low-cost propulsion for small satellites has given rise to a growing interest in low-power cathode-less plasma thrusters. Plasma is produced within a source tube using radiofrequency (RF) ionisation, enhanced by a magnetic field which also accelerates the discharge via the magnetic nozzle effect. A key advantage of cathode-less thrusters is that they can operate on a wider range of propellants, more easily stored, and often inexpensive (e.g., iodine) compared to traditional xenon. Despite simple hardware, plasma dynamics in this kind of device are highly complex. This work presents a numerical suite developed for cathode-less plasma thruster design and analysis. First, a 0D Global Source Model provides the plasma production in the source. A fully kinetic Particle-in-Cell model (2D and 3D) then handles plasma expansion in the magnetic nozzle. The capabilities of the suite are presented by-way-of investigation into the behaviour of alternative propellants iodine and krypton within the 50 and 150 W class REGULUS thrusters. The performance of each propellant is assessed in terms of plasma source and magnetic nozzle efficiencies. The results are then benchmarked against experimental measurements, obtaining agreement of < 30%. At absorbed powers < 20 W, iodine exhibits comparable performance to xenon but produces about 50% less thrust as the power is increased above 40 W. This occurs because of the molecular reaction processes seen by iodine, and associated inelastic energy thresholds which result in higher collisional energy losses. The high ionisation energy of krypton results in a low source efficiency. Instead, in the magnetic nozzle, krypton was found to perform best, facilitating the most thermal-to-kinetic conversion. But, the final thrust is < 20% of xenon; instead iodine performs within 43% of the thrust provided by xenon. Finally, iodine contamination of spacecraft surfaces is found to be comparable to estimates found in other electric propulsion devices.

    Highlights Multiscale numerical model for cathode-less plasma thruster design and characterisation. 0D Global Source Model for inductive RF plasma production. Fully kinetic Particle-in-Cell model for the magnetic nozzle and expansion cone. Iodine performs within 43% of the thrust provided by xenon. Experimental agreement to REGULUS-50 and REGULUS-150 thrusters within 30%.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Coupled global and PIC modelling of the REGULUS cathode-less plasma thrusters operating on xenon, iodine and krypton


    Beteiligte:
    Andrews, Shaun (Autor:in) / Andriulli, Raoul (Autor:in) / Souhair, Nabil (Autor:in) / Di Fede, Simone (Autor:in) / Pavarin, Daniele (Autor:in) / Ponti, Fabrizio (Autor:in) / Magarotto, Mirko (Autor:in)

    Erschienen in:

    Acta Astronautica ; 207 ; 227-239


    Erscheinungsdatum :

    2023-03-13


    Format / Umfang :

    13 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch





    Laser Induced Fluorescence Measurements in Xenon Plasma Thrusters

    Dorval, N. / European Space Agency / Centre National d'Etudes Spatiales | British Library Conference Proceedings | 2000


    Cathode Phenomena in Plasma Thrusters

    Auweter-Kurtz, M. | Online Contents | 1993


    Cathode phenomena in plasma thrusters

    AUWETER-KURTZ, MONIKA / GLOCKER, B. / KURTZ, H. et al. | AIAA | 1990


    Cathode phenomena in plasma thrusters

    SCHRADE, H. / AUWETER-KURTZ, M. / KURTZ, H. | AIAA | 1987