Abstract This study investigates the combustion performance of a number of novel, crescent shaped cavities placed directly in front of the fuel injection point in a scramjet combustor. Cavities are commonly used for flameholding in scramjet combustors, however they are almost exclusively placed downstream of the fuel injection point and their effect on mixing performance is limited. The crescent cavities in this study were previously found to enhance mixing in chemically frozen flow and the purpose of this study is to investigate whether this performance enhancement translates to chemically reacting flow. The performance of the cavities was numerically studied using unsteady Reynolds-Averaged Navier–Stokes (URANS) modelling with hydrogen as the fuel and an isothermal 1800 K combustor wall, and performance was compared to a no-cavity baseline. The cavities were found to enhance combustion by up to 114% and heat release by up to 143% compared to the baseline when hybrid fuelling is employed and by 47.4% and 54.7%, respectively, when no hybrid fuelling is used. Total pressure loss in the cavity cases was similar to the baseline case and viscous drag was lower in the cavity cases due to the presence of combustion and fuel near the wall. Flame penetration was lower in the cavity cases than in the baseline however as a result of the increased fuel concentration on the wall, while mean heat flux is lower in the cavity cases than in the baseline. Ignition is also found to occur more rapidly in the cavity cases and the flow inside the cavity is oscillatory in nature, as was the case in chemically frozen flow. Given that the crescent cavities in this study significantly enhance combustion performance with limited drawbacks, especially when hybrid fuelling is used, they are an attractive option for operational scramjet combustor design.

    Highlights Ignition occurs more rapidly in the cavity cases. Crescent cavities enhance combustion by up to 114% and heat release by up to 143%. Use of hybrid fuelling improves cavity combustion performance, but lowers flame. Total pressure loss and wall drag are similar to the baseline for the cavity cases. Cavity flowfield is oscillatory in nature and affects cavity combustion performance.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Numerical investigation of combustion characteristics of upstream crescent cavities in a scramjet combustor


    Beteiligte:
    Roos, Tim (Autor:in) / Pudsey, Adrian (Autor:in) / Ogawa, Hideaki (Autor:in)

    Erschienen in:

    Acta Astronautica ; 187 ; 43-60


    Erscheinungsdatum :

    2021-05-16


    Format / Umfang :

    18 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Numerical investigation of fuel mixing with upstream crescent cavities in a scramjet combustor

    Roos, Tim / Pudsey, Adrian / Bricalli, Mathew et al. | Elsevier | 2020


    Numerical Investigation of Upstream Cavity Enhanced Combustion in a Scramjet Combustor

    Roos, Tim / Pudsey, Adrian S. / Bricalli, Mathew et al. | AIAA | 2020


    NUMERICAL INVESTIGATION OF UPSTREAM CAVITY ENHANCED COMBUSTION IN A SCRAMJET COMBUSTOR

    Roos, Tim / Pudsey, Adrian S. / Bricalli, Mathew et al. | TIBKAT | 2020


    Investigation of combustion characteristics in a hydrogen-fueled scramjet combustor

    Tian, Ye / Shi, Wen / Guo, Mingming et al. | Elsevier | 2021


    Combustion characteristics in a supersonic combustor with ethylene injection upstream of dual parallel cavities

    Zhong, Zhan / Wang, Zhenguo / Sun, Mingbo et al. | SAGE Publications | 2016