AbstractIn many types of space mission there is a constant desire for larger and larger instrument apertures, primarily for the purposes of increased resolution or sensitivity. In the Radio Frequency domain, this is currently addressed by antennas that unfold or deploy on-orbit. However, in the optical and infrared domains, this is a significantly more challenging problem, and has up to now either been addressed by simply having large monolithic mirrors (which are fundamentally limited by the volume and mass lifting capacity of any launch vehicle) or by complex ‘semi-folding’ designs such as the James Webb Space Telescope. An alternative is to consider a fractionated instrument which is launched as a collection of individual smaller elements which are then assembled (or self-assemble) once in space, to form a much larger overall instrument. SSTL has been performing early concept assessment work on such systems for high resolution science observations from high orbits (potentially also for persistent surveillance of Earth). A point design of a 25 m sparse aperture (annular ring) telescope is presented. Key characteristics of 1) multiple small elements launched separately and 2) on-orbit assembly to form a larger instrument are included in the architecture. However, on-orbit assembly brings its own challenges in terms of guidance navigation and control, robotics, docking mechanisms, system control and data handling, optical alignment and stability, and many other elements. The number and type of launchers used, and the technologies and systems used heavily affect the outcome and general cost of the telescope. The paper describes one of the fractionated architecture concepts currently being studied by SSTL, including the key technologies and operational concepts that may be possible in the future.

    HighlightsOn-orbit assembly of large telescopes will enable future astronomical discoveries.The paper considers the design of a 25 m thinned aperture space telescope.Future on-orbit assembly is likely to be a combination of methods and technologies.The total mass in orbit needed for the system considered in the paper is ∼110 tonnes.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Building large telescopes in orbit using small satellites


    Beteiligte:
    Saunders, Chris (Autor:in) / Lobb, Dan (Autor:in) / Sweeting, Martin (Autor:in) / Gao, Yang (Autor:in)

    Erschienen in:

    Acta Astronautica ; 141 ; 183-195


    Erscheinungsdatum :

    2017-09-18


    Format / Umfang :

    13 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    An orbit determination approach for small satellites

    Laneve, G. / Curti, F. | British Library Online Contents | 1997


    An orbit determination approach for small satellites

    Laneve, G. / Curti, F. / European Space Agency | British Library Conference Proceedings | 1997


    In-Orbit FPGA reprogramming device for small satellites

    Sakib, Shadman / Faizullin, Dmytro / Koga, Yohei et al. | Elsevier | 2023


    Orbit Mechanics About Small Satellites (AAS 09-220)

    Scheeres, D.J. / American Astronautical Society / American Institute of Aeronautics and Astronautics | British Library Conference Proceedings | 2009


    Synchronous orbit communications satellites

    Meyer, J.C. | Engineering Index Backfile | 1965