Abstract For precursor solar sail activities a strategy for a controlled deployment of large membranes was developed based on a combination of zig-zag folding and coiling of triangular sail segments spanned between crossed booms. This strategy required four autonomous deployment units that were jettisoned after the deployment is completed. In order to reduce the complexity of the system an adaptation of that deployment strategy is investigated. A baseline design for the deployment mechanisms is established that allows the deployment actuation from a central bus system in order to reduce the complexity of the system. The mass of such a sail craft will be slightly increased but its performance is still be reasonable for first solar sail missions. The presented design will be demonstrated on breadboard level showing the feasibility of the deployment strategy. The characteristic acceleration will be evaluated and compared to the requirements of certain proposed solar sail missions.
Performance analysis and mission applications of a new solar sail concept based on crossed booms with tip-deployed membranes
Advances in Space Research ; 67 , 9 ; 2736-2745
2020-10-01
10 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Deutsches Zentrum für Luft- und Raumfahrt (DLR) | 2021
|Synchronous Deployed Solar Sail Concept Demonstration
AIAA | 2008
|Synchronous Deployed Solar Sail Subsystem Design Concept
AIAA | 2007
|Experimental Modal Analysis of Solar Sail Booms
AIAA | 2008
|Slender Solar Sail Booms: Finite Element Analysis
AIAA | 2007
|